Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Copper Guard

COPPER GUARD is a fast-drying acrylic-based copper paint that gives surfaces a durable cover. Good coverage can be reached, depending on layer thickness, in 2 to 3 layers. COPPER GUARD is over sprayable after 10 minutes with the same product or after 2½ hours with other coatings. The unique characteristic about COPPER GUARD is that, in addition to coating, it can also be used for spot welding.

  • Suitable metal surfaces and hard plastics
  • Good adhesion on most ferrous and non-ferrous metals
  • Fast curing
  • Can be used for spot welding
Article nr Name Content
T112002 Copper Guard 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Aerosol
Odour: Characteristic
Propellant: Propane-Butane
pH-value: Mixture is non-polar/aprotic.
Initial boiling point: -44.5°C
Flash point: -97°C
Ignition Temperature: 365°C
Temperatur resistance: 130°C
Auto-ignition temperature: Product is not selfigniting.
Explosive properties: Product is not explosive. However, formation of explosive air/vapour mixtures are possible.
Lower explosion limit: 0.7 Vol%
Upper explosion limit: 13 Vol%
Pressure (at 20°C): 4 Bar
Vapour pressure (20°C): 8300 hPa
Density (20°C): 0.717 g/cm³

VOC: 90.68%
Delivery: 1,5 g/s with strong atomization
Solubility in water: Not miscible or difficult to mix.
Solvent content:
Organic solvents: 90.7 %
Solids content: 9.6 %
Coating
Base: Acrylic resin in combination with a high percentage of copper pigments
Color: Copper
Gloss: Semi gloss
Recommended layer thickness: 50 micron wet,  ± 10 micron dry
Drying time: approx. 15-30 minutes, depending on the layer thickness.
Application temperature: 10°C - 25°C
Storage conditions: Cool (10°C - 20°C) and dry

  • APPLICATION:
    Suitable for forge art, metal frames, gutters, sinks, garden ornaments, metal fence or other metal surfaces. Hard plastics.
  • USE:
    - Clean the surface of rust, dirt, etc. Allow to dry, sand painted surfaces.
    - Cover adjacent not to paint surfaces.
    - Bring the can to room temperature.
    - Shake vigorously for 2 to 3 minutes. Apply several layers thinly at a distance of approx. 30 cm.
    - Reverse the container after use and clean the spray nozzle.
    - Respect the drying times.

Copper Guard

COPPER GUARD is a fast-drying acrylic-based copper paint that gives surfaces a durable cover. Good coverage can be reached, depending on layer thickness, in 2 to 3 layers. COPPER GUARD is over sprayable after 10 minutes with the same product or after 2½ hours with other coatings. The unique characteristic about COPPER GUARD is that, in addition to coating, it can also be used for spot welding.

  • Suitable metal surfaces and hard plastics
  • Good adhesion on most ferrous and non-ferrous metals
  • Fast curing
  • Can be used for spot welding
Article nr Name Content
T112002 Copper Guard 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Aerosol
Odour: Characteristic
Propellant: Propane-Butane
pH-value: Mixture is non-polar/aprotic.
Initial boiling point: -44.5°C
Flash point: -97°C
Ignition Temperature: 365°C
Temperatur resistance: 130°C
Auto-ignition temperature: Product is not selfigniting.
Explosive properties: Product is not explosive. However, formation of explosive air/vapour mixtures are possible.
Lower explosion limit: 0.7 Vol%
Upper explosion limit: 13 Vol%
Pressure (at 20°C): 4 Bar
Vapour pressure (20°C): 8300 hPa
Density (20°C): 0.717 g/cm³

VOC: 90.68%
Delivery: 1,5 g/s with strong atomization
Solubility in water: Not miscible or difficult to mix.
Solvent content:
Organic solvents: 90.7 %
Solids content: 9.6 %
Coating
Base: Acrylic resin in combination with a high percentage of copper pigments
Color: Copper
Gloss: Semi gloss
Recommended layer thickness: 50 micron wet,  ± 10 micron dry
Drying time: approx. 15-30 minutes, depending on the layer thickness.
Application temperature: 10°C - 25°C
Storage conditions: Cool (10°C - 20°C) and dry

  • APPLICATION:
    Suitable for forge art, metal frames, gutters, sinks, garden ornaments, metal fence or other metal surfaces. Hard plastics.
  • USE:
    - Clean the surface of rust, dirt, etc. Allow to dry, sand painted surfaces.
    - Cover adjacent not to paint surfaces.
    - Bring the can to room temperature.
    - Shake vigorously for 2 to 3 minutes. Apply several layers thinly at a distance of approx. 30 cm.
    - Reverse the container after use and clean the spray nozzle.
    - Respect the drying times.