WELD PRIMER ULTRA is a high-quality welding primer which provides excellent corrosion protection. Due to the excellent adhesion of WELD PRIMER ULTRA, the risk of corrosion and rust formation is drastically reduced. It can be effortlessly applied to the surfaces to be protected and dries quickly.
| Article nr | Name | Content |
|---|---|---|
| T903500 | Weld Primer Ultra 500ml | 500ml |
Base: Zinc phosphate, talcum, titanium dioxide, carbon black, modified alkyd resins
Colour: Red-brown
Physical state: Aerosol
Odeur: Solvents
Salt Spray Test (DIN 50021 + DIN53210): 80 mu 250 hours à Ri0
Boiling point: -44.5°C
Lower and upper explosion limit:
- Lower: 0.6 Vol%
- Upper: 13 Vol%
Flash point: -97°C
Ignition Temperature: 365°C
Weldable: after 15 minutes at 20 ºC (max. layer 30 mu)
Overpaintable: after 8 hours
pH: Mixture is non-polar/aprotic.
Vapour pressure (at 20°C): 2100 hPa
Pressure (at 20°C): 3.1 bar
Density (at 20°C): 0.748 g/cm³
Organic solvents: 80.2%
Solids content: 20.4%
Pressure (at 20°C): 3.1 bar
Delivery rate (at 20°C): 1.5 g/sec
Recommended operating / temperature range: -50°C - 100°C
Peak temperature: 130°C
Application temperature: 10°C - 25°C
Storage conditions: Cool (10°C - 20°C) and dry
WELD PRIMER ULTRA is a high-quality welding primer which provides excellent corrosion protection. Due to the excellent adhesion of WELD PRIMER ULTRA, the risk of corrosion and rust formation is drastically reduced. It can be effortlessly applied to the surfaces to be protected and dries quickly.
| Article nr | Name | Content |
|---|---|---|
| T903500 | Weld Primer Ultra 500ml | 500ml |
Base: Zinc phosphate, talcum, titanium dioxide, carbon black, modified alkyd resins
Colour: Red-brown
Physical state: Aerosol
Odeur: Solvents
Salt Spray Test (DIN 50021 + DIN53210): 80 mu 250 hours à Ri0
Boiling point: -44.5°C
Lower and upper explosion limit:
- Lower: 0.6 Vol%
- Upper: 13 Vol%
Flash point: -97°C
Ignition Temperature: 365°C
Weldable: after 15 minutes at 20 ºC (max. layer 30 mu)
Overpaintable: after 8 hours
pH: Mixture is non-polar/aprotic.
Vapour pressure (at 20°C): 2100 hPa
Pressure (at 20°C): 3.1 bar
Density (at 20°C): 0.748 g/cm³
Organic solvents: 80.2%
Solids content: 20.4%
Pressure (at 20°C): 3.1 bar
Delivery rate (at 20°C): 1.5 g/sec
Recommended operating / temperature range: -50°C - 100°C
Peak temperature: 130°C
Application temperature: 10°C - 25°C
Storage conditions: Cool (10°C - 20°C) and dry
We use our own and third-party cookies to personalize content and advertisements, to be able to offer functions for social media and to analyze access to our website. The cookies are described in more detail under "Cookie Settings" and can be activated or deactivated. By clicking on "Allow all cookies" you agree to their use. You can subsequently change your cookie settings on the "Privacy Policy" page. Additional Information: Privacy policy incl. cookie settings | General terms and conditions