Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Unblock

UNBLOCK is a very fast and powerful rust blasting penetrating oil which offers a long-lasting lubricating effect due to the addition of MoS2. Because of the high-performance oil, UNBLOCK reacts very quickly and is safe and economic in use. Due to the low surface tension, the high penetration force offers the possibility to release even highly seized parts on the most difficult places. It loosens and lubricates rusted bolts, nuts, screws and other parts. UNBLOCK offers a protective film after use and is non-aggressive to most materials.

  • Powerful and fast rust blaster
  • Strong and fast penetrating performance
  • Long-lasting lubricating effect due to the addition of MoS2
  • Allows a precise lubrication of all fine mechanisms
  • Protects against new rust
  • Unblocks rusted parts
  • Multifunctional penetrating oil for universal use
  • Non aggressive to most materials
Article nr Name Content
T317001 Unblock 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Aerosol
Colour: According to product designation
Odour: characteristic
Odour threshold: not determined
Initial boiling point and boiling range: -44,5°C
Flash point: -97°C
Ignition temperature: > 220°C

Upper/lower flammability or explosive limits: 0.6 – 10.9 Vol-%
Kinematic viscosity (at 40°C): ≤ 20,5 mm²/s
Vapour pressure (at 20°C): 4000 hPa
Density (at 20°C): 0,707 g/cm³
Application temperature: 10°C - 35°C
Storage: Cool (10°C - 20°C) and dry
Safety measures: consult the Safety Data Sheet.

  • APPLICATION:
  • Loosens rustes screws, nuts, bolts, etc.
  • Penetrates easily corroded, rusted and frozen parts, e.g. screws, bolts and nuts, pipe fittings and joints
  • Non-aggressive to most materials
    - ! Please test the product in an inconspicuous place !
  • Leaves a protective film
  • USE:
  • Shake before use
  • Use UNBLOCK at room temperature
  • Spray from a short distance on the parts to disassemble
  • Give the product time to act
  • Repeat if necessary

Unblock

UNBLOCK is a very fast and powerful rust blasting penetrating oil which offers a long-lasting lubricating effect due to the addition of MoS2. Because of the high-performance oil, UNBLOCK reacts very quickly and is safe and economic in use. Due to the low surface tension, the high penetration force offers the possibility to release even highly seized parts on the most difficult places. It loosens and lubricates rusted bolts, nuts, screws and other parts. UNBLOCK offers a protective film after use and is non-aggressive to most materials.

  • Powerful and fast rust blaster
  • Strong and fast penetrating performance
  • Long-lasting lubricating effect due to the addition of MoS2
  • Allows a precise lubrication of all fine mechanisms
  • Protects against new rust
  • Unblocks rusted parts
  • Multifunctional penetrating oil for universal use
  • Non aggressive to most materials
Article nr Name Content
T317001 Unblock 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Aerosol
Colour: According to product designation
Odour: characteristic
Odour threshold: not determined
Initial boiling point and boiling range: -44,5°C
Flash point: -97°C
Ignition temperature: > 220°C

Upper/lower flammability or explosive limits: 0.6 – 10.9 Vol-%
Kinematic viscosity (at 40°C): ≤ 20,5 mm²/s
Vapour pressure (at 20°C): 4000 hPa
Density (at 20°C): 0,707 g/cm³
Application temperature: 10°C - 35°C
Storage: Cool (10°C - 20°C) and dry
Safety measures: consult the Safety Data Sheet.

  • APPLICATION:
  • Loosens rustes screws, nuts, bolts, etc.
  • Penetrates easily corroded, rusted and frozen parts, e.g. screws, bolts and nuts, pipe fittings and joints
  • Non-aggressive to most materials
    - ! Please test the product in an inconspicuous place !
  • Leaves a protective film
  • USE:
  • Shake before use
  • Use UNBLOCK at room temperature
  • Spray from a short distance on the parts to disassemble
  • Give the product time to act
  • Repeat if necessary