Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Spatt Free N

SPATT FREE N is a water-based anti-adhesion agent. It prevents very effectively the sticking of weld spatters on the base material. It can be easily applied directly on the MIG/MAG welding torch prior to the welding process to prevent the sticking of the welding wire to the welding torch.
Especially for applications where flammable aerosols are not allowed, e.g. welding in hollow parts or narrow spaces where flammable propellants or solvents should not inflame.
SPATT FREE N is free of silicone, not flammable and biologically degradable. Due to its optimized composition of ingredients, it offers a high coverage and is very economical in use. 

  • For applications where flammable aerosols are not allowed, e.g. welding in hollow parts or narrow spaces where flammable propellant or solvents should not inflame
  • Offers excellent protection of surrounding surfaces during welding process
  • Suitable for all kinds of welding such as oxy-fuel (gas), electric arc, MIG/MAG, WIG, TIG and UP welding etc.
  • Prevents sticking of weld spatters on base material
  • Water based
  • Not flammable
  • No toxic classifications
  • Silicone free
  • Does not evaporate off the work piece
  • Safe for welder and environment
  • Simplifies maintenance and cleaning of MIG/MAG welding torch in order to extend its life cycle (no sticking of welding wire)
  • Can be easily painted over
Article nr Name Content
T371001 Spatt Free N 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Form: aerosol
Colour: pink
Odour: characteristic
Boiling point: 100°C
Flash point: > 100°C
Auto-ignition temperature: 400°C

Lower explosion limit: 0,9 Vol%
Upper explosion limit: 5,9 Vol%
Vapour pressure (at 20°C): 83.000 hPa
Density (at 20°C): 1,013 g/cm³
Water solubility: immiscible
Dynamic viscosity (at 20°C): 0,952 mPas

  • Use SPATT FREE N at room temperature and shake well before use.  
  • Prior to the welding process, apply a thin layer on surrounding surface, spraying from a distance of about 20-30 cm.
  • Suitable for all kinds of welding such as oxy-fuel (gas), electric arc, MIG/MAG, WIG, TIG and UP welding etc. Can be used in any industry, metal and steel construction, car body shops etc.
  • When applied on the MIG/MAG welding torch, it prevents sticking of the welding wire to the wire torch.
  • If sprayed excessively, cleaning with a cleaner or degreaser might be necessary after welding and prior to after-treatment. Please use “SAFE CLEAN” and “BIO CLEAN”.

Spatt Free N

SPATT FREE N is a water-based anti-adhesion agent. It prevents very effectively the sticking of weld spatters on the base material. It can be easily applied directly on the MIG/MAG welding torch prior to the welding process to prevent the sticking of the welding wire to the welding torch.
Especially for applications where flammable aerosols are not allowed, e.g. welding in hollow parts or narrow spaces where flammable propellants or solvents should not inflame.
SPATT FREE N is free of silicone, not flammable and biologically degradable. Due to its optimized composition of ingredients, it offers a high coverage and is very economical in use. 

  • For applications where flammable aerosols are not allowed, e.g. welding in hollow parts or narrow spaces where flammable propellant or solvents should not inflame
  • Offers excellent protection of surrounding surfaces during welding process
  • Suitable for all kinds of welding such as oxy-fuel (gas), electric arc, MIG/MAG, WIG, TIG and UP welding etc.
  • Prevents sticking of weld spatters on base material
  • Water based
  • Not flammable
  • No toxic classifications
  • Silicone free
  • Does not evaporate off the work piece
  • Safe for welder and environment
  • Simplifies maintenance and cleaning of MIG/MAG welding torch in order to extend its life cycle (no sticking of welding wire)
  • Can be easily painted over
Article nr Name Content
T371001 Spatt Free N 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Form: aerosol
Colour: pink
Odour: characteristic
Boiling point: 100°C
Flash point: > 100°C
Auto-ignition temperature: 400°C

Lower explosion limit: 0,9 Vol%
Upper explosion limit: 5,9 Vol%
Vapour pressure (at 20°C): 83.000 hPa
Density (at 20°C): 1,013 g/cm³
Water solubility: immiscible
Dynamic viscosity (at 20°C): 0,952 mPas

  • Use SPATT FREE N at room temperature and shake well before use.  
  • Prior to the welding process, apply a thin layer on surrounding surface, spraying from a distance of about 20-30 cm.
  • Suitable for all kinds of welding such as oxy-fuel (gas), electric arc, MIG/MAG, WIG, TIG and UP welding etc. Can be used in any industry, metal and steel construction, car body shops etc.
  • When applied on the MIG/MAG welding torch, it prevents sticking of the welding wire to the wire torch.
  • If sprayed excessively, cleaning with a cleaner or degreaser might be necessary after welding and prior to after-treatment. Please use “SAFE CLEAN” and “BIO CLEAN”.