Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Solder & Seal X

SOLDER & SEAL X has been developed and designed for any electrical connections that require high quality, reliability, long life and watertightness. SOLDER & SEAL X consists of a two-part shrink solder joint with a solder ring and two coloured adhesive rings. The solder of SOLDER & SEAL X is soft and has improved properties. The shrink-weld joint provides insulation and reduces installation costs. SOLDER & SEAL X is available in different sizes (see product references) and can be used for twisted and solid cables with a diameter from 0.25 mm² to 6.0 mm².
 

  • Soldering - sealing – connecting in one application
  • Connecting wire to component terminals
  • Can be installed quickly and easily with lighter or heat gun
  • Waterproof connection
  • Transparent insulation sleeve provides encapsulation, inspect, stain relief and insulation
  • Resistant to temperatures from 60°C to +130°C.
  • Flux and sealing integrated
  • Sealing ring with thermoplastic adhesive seals completely
  • Special construct:
  • Cross-linked modified polyolefin provides high flexibility, insulating capacity and is flame retardant
Article nr Name Content
T845101 Solder & Seal X clear (100 pcs.) 100 Pcs
T845102 Solder & Seal X red (100 pcs.) 100 pcs
T845103 Solder & Seal X blue (100 pcs.) 100 pcs
T845104 Solder & Seal X yellow (100 pcs.) 100 pcs
T848589 Solder & Seal X + Topflux Assortment 1pc,

» To the shop
  • Technical data
  • Application and usage
  • Downloads

External wall: radiation cross-linked polyolefine
Shrink ratio: 2:1
Solder rings: 2 rings Sn, Bi, Pb with activated flux
Sealing rings: heat-resistant stabilised thermoplastic material
Protection Type IEC 60529: IP67
Voltage loss: < 0.002 V

Junction resistance: < 0.004 Ω
Insulation resistance: 10 GΩ
Installation temperature: 180°C
Temperature resistance: -60°C to +130°C
Voltage resistant: > 600V
Volume resistance: ≥ 10 - 15 Ω/cm
Dielectric strength: ≥ 25 kV/mm

  • USE:
    - Connection wire to component terminals
    - Industrial maintenance service
    - Garages and car body workshops
    - Repair of tools and machines
    - Horticulture and exterior lighting
    - Sign posting, neon signs
    - Ship building and ship repair
    - Installation of car radios and alarm systems
    - Installation of towing hooks
    - Truck and bus construction
    - Agriculture contractors, farmers
    - Building industry
    - Pleasure crafts and outboard motors
    - Motorcycles
    - Electrical installation and maintenance
  • APPLICATION:
    - Choose right size of connector, apply wire from both sides until they overlap at the position of the lead core.
    - Press lead ring for a short mechanic fixing.
    - Apply heat by heat gun or lighter.
    - Start from the lead core and move to the outside, remain until the lead is melted and the connection is completed.

Solder & Seal X

SOLDER & SEAL X has been developed and designed for any electrical connections that require high quality, reliability, long life and watertightness. SOLDER & SEAL X consists of a two-part shrink solder joint with a solder ring and two coloured adhesive rings. The solder of SOLDER & SEAL X is soft and has improved properties. The shrink-weld joint provides insulation and reduces installation costs. SOLDER & SEAL X is available in different sizes (see product references) and can be used for twisted and solid cables with a diameter from 0.25 mm² to 6.0 mm².
 

  • Soldering - sealing – connecting in one application
  • Connecting wire to component terminals
  • Can be installed quickly and easily with lighter or heat gun
  • Waterproof connection
  • Transparent insulation sleeve provides encapsulation, inspect, stain relief and insulation
  • Resistant to temperatures from 60°C to +130°C.
  • Flux and sealing integrated
  • Sealing ring with thermoplastic adhesive seals completely
  • Special construct:
  • Cross-linked modified polyolefin provides high flexibility, insulating capacity and is flame retardant
Article nr Name Content
T845101 Solder & Seal X clear (100 pcs.) 100 Pcs
T845102 Solder & Seal X red (100 pcs.) 100 pcs
T845103 Solder & Seal X blue (100 pcs.) 100 pcs
T845104 Solder & Seal X yellow (100 pcs.) 100 pcs
T848589 Solder & Seal X + Topflux Assortment 1pc,

» To the shop
  • Technical data
  • Application and usage
  • Downloads

External wall: radiation cross-linked polyolefine
Shrink ratio: 2:1
Solder rings: 2 rings Sn, Bi, Pb with activated flux
Sealing rings: heat-resistant stabilised thermoplastic material
Protection Type IEC 60529: IP67
Voltage loss: < 0.002 V

Junction resistance: < 0.004 Ω
Insulation resistance: 10 GΩ
Installation temperature: 180°C
Temperature resistance: -60°C to +130°C
Voltage resistant: > 600V
Volume resistance: ≥ 10 - 15 Ω/cm
Dielectric strength: ≥ 25 kV/mm

  • USE:
    - Connection wire to component terminals
    - Industrial maintenance service
    - Garages and car body workshops
    - Repair of tools and machines
    - Horticulture and exterior lighting
    - Sign posting, neon signs
    - Ship building and ship repair
    - Installation of car radios and alarm systems
    - Installation of towing hooks
    - Truck and bus construction
    - Agriculture contractors, farmers
    - Building industry
    - Pleasure crafts and outboard motors
    - Motorcycles
    - Electrical installation and maintenance
  • APPLICATION:
    - Choose right size of connector, apply wire from both sides until they overlap at the position of the lead core.
    - Press lead ring for a short mechanic fixing.
    - Apply heat by heat gun or lighter.
    - Start from the lead core and move to the outside, remain until the lead is melted and the connection is completed.