Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Solder & Seal

SOLDER & SEAL has been developed and designed for electrical connections, which require high quality, reliability, long life span and water tightness.
SOLDER & SEAL consist of a highest quality heat-shrinkable kynar sleeve, containing two pre-fluxed solder rings and thermoplastic sealing rings. SOLDER & SEAL is very easy to install and the quality of the connection can be visually checked because of the transparency of the connector.
SOLDER & SEAL comes in different sizes (see product references) and can be applied for twisted and solid cables in a diameters from 0,25 mm² to 6,0 mm². 

  • Soldering - sealing – connecting in one application
  • Connecting wire to component terminals
  • Can be installed quickly and easily with lighter or heat gun
  • Waterproof connection
  • Transparent insulation sleeve provides encapsulation, inspect, stain relief and insulation
  • Resistant to temperatures from -55°C to +130°C.
  • Shrinkable kynar sheath: flame-retardant, remains flexible, high insulation power
  • Pre-fluxed solder provides: no voltage loss, solid connection, perfectly smooth flow
  • Sealing ring with thermoplastic adhesive seals completely
Article nr Name Content
T845001 Solder & Seal clear (50 pcs) 50pcs
T845002 Solder & Seal red (50 pcs) 50pcs
T845003 Solder & Seal blue (50 pcs) 50pcs
T845004 Solder & Seal yellow (50 pcs) 50pcs

» To the shop
  • Technical data
  • Application and usage
  • Downloads

External wall: flame-retardant kynar polymer.
Shrink ratio: 2 / 1
Tensile strehgh NAS175: >4,5 N than outgoing line
Corrosion resistance (35° 96 hrs, 5 % NaCl): ≤ 2,5MV
Sealing rings: thermally stabilized thermoplastic
Protection Type IEC 60529: IP 67
Voltage loss NAS1745: < 2 mV.

Installation temperature: 80°C - 120°C
Volume resistivity (Ω cm): ≥ 10^15
Dielectric strength ASTM D2671 (kV/mm): ≥ 32
Temperature resistance: -55°C to +150°C.
Voltage resistant: > 600V

  • Use:
     - Connection wire to component terminals
     - Industrial maintenance service
     - Garages and car body workshops
     - Repair of tools and machines
     - Horticulture and exterior lighting
     - Sign posting, neon signs
     - Ship building and ship repair
     - Installation of car radios and alarm systems
     - Installation of towing hooks
     - Truck and bus construction
     - Agriculture contractors, farmers
     - Building industry
     - Pleasure crafts and outboard motors
     - Motorcycles
     - Electrical installation and maintenance
  • Application:
     - Choose right size of connector, apply wire from both sides until they overlap at the position of the lead core. 
     - Press lead ring for a short mechanic fixing. 
     - Apply heat by heat gun or lighter. 
     - Start from the lead core and move to the outside, remain until the lead is melted and the connection is completed.

Solder & Seal

SOLDER & SEAL has been developed and designed for electrical connections, which require high quality, reliability, long life span and water tightness.
SOLDER & SEAL consist of a highest quality heat-shrinkable kynar sleeve, containing two pre-fluxed solder rings and thermoplastic sealing rings. SOLDER & SEAL is very easy to install and the quality of the connection can be visually checked because of the transparency of the connector.
SOLDER & SEAL comes in different sizes (see product references) and can be applied for twisted and solid cables in a diameters from 0,25 mm² to 6,0 mm². 

  • Soldering - sealing – connecting in one application
  • Connecting wire to component terminals
  • Can be installed quickly and easily with lighter or heat gun
  • Waterproof connection
  • Transparent insulation sleeve provides encapsulation, inspect, stain relief and insulation
  • Resistant to temperatures from -55°C to +130°C.
  • Shrinkable kynar sheath: flame-retardant, remains flexible, high insulation power
  • Pre-fluxed solder provides: no voltage loss, solid connection, perfectly smooth flow
  • Sealing ring with thermoplastic adhesive seals completely
Article nr Name Content
T845001 Solder & Seal clear (50 pcs) 50pcs
T845002 Solder & Seal red (50 pcs) 50pcs
T845003 Solder & Seal blue (50 pcs) 50pcs
T845004 Solder & Seal yellow (50 pcs) 50pcs

» To the shop
  • Technical data
  • Application and usage
  • Downloads

External wall: flame-retardant kynar polymer.
Shrink ratio: 2 / 1
Tensile strehgh NAS175: >4,5 N than outgoing line
Corrosion resistance (35° 96 hrs, 5 % NaCl): ≤ 2,5MV
Sealing rings: thermally stabilized thermoplastic
Protection Type IEC 60529: IP 67
Voltage loss NAS1745: < 2 mV.

Installation temperature: 80°C - 120°C
Volume resistivity (Ω cm): ≥ 10^15
Dielectric strength ASTM D2671 (kV/mm): ≥ 32
Temperature resistance: -55°C to +150°C.
Voltage resistant: > 600V

  • Use:
     - Connection wire to component terminals
     - Industrial maintenance service
     - Garages and car body workshops
     - Repair of tools and machines
     - Horticulture and exterior lighting
     - Sign posting, neon signs
     - Ship building and ship repair
     - Installation of car radios and alarm systems
     - Installation of towing hooks
     - Truck and bus construction
     - Agriculture contractors, farmers
     - Building industry
     - Pleasure crafts and outboard motors
     - Motorcycles
     - Electrical installation and maintenance
  • Application:
     - Choose right size of connector, apply wire from both sides until they overlap at the position of the lead core. 
     - Press lead ring for a short mechanic fixing. 
     - Apply heat by heat gun or lighter. 
     - Start from the lead core and move to the outside, remain until the lead is melted and the connection is completed.