TECH-MASTERS Group
Changing region
SEAL TECH ALU is a unique adhesive and construction joint sealant for bonding all types of materials that is aluminium coloured and adjusts slightly on the metal surface it is applied on. SEAL TECH ALU can be used on any substrate, is extremely versatile and the answer to any desired bonding. SEAL TECH ALU is completely free of solvents, plasticizers, silicones and isocyanates. SEAL TECH ALU dries quickly and remains elastic.
| Article nr | Name | Content |
|---|---|---|
| T569801 | Seal Tech Alu 310ml | 310ml |
» To the shop
Base: Silan-terminated polymers
Physical state: Paste
Colour: grey
Odour: odourless
Initial boiling point and boiling range: < 34 °C
Flash point: > 180 °C
Vapour pressure (20 °C): = 100 Pa
Density (20 °C): 1.6527 g/cm³
Relative density (20 °C): 1.653
Self ignition temperature: ≈ 420 °C
Curing method: Exposure to air humidity
Non-slump properties: Non-slump; < 2mm
Extrusion rate: > 100 g/min
Specific weight: 1.1 g/cm³
Skinforming time: 15 minutes
Curing rate: 3mm/24 hours
Shrinkage: < 3%
Tensile strength: 2.5 N/mm²
Elongation at break: 500%
Shore A Hardness: 45
Movement capability: 10% relative to the initial width of the joint
Chemical resistance
Good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, lyes
Temperature resistance: -40°C to +100°C
Application temperature: +5°C to +40°C (substrate temperature)
Storeage temperature: +5°C to 25°C
SEAL TECH ALU is a unique adhesive and construction joint sealant for bonding all types of materials that is aluminium coloured and adjusts slightly on the metal surface it is applied on. SEAL TECH ALU can be used on any substrate, is extremely versatile and the answer to any desired bonding. SEAL TECH ALU is completely free of solvents, plasticizers, silicones and isocyanates. SEAL TECH ALU dries quickly and remains elastic.
| Article nr | Name | Content |
|---|---|---|
| T569801 | Seal Tech Alu 310ml | 310ml |
» To the shop
Base: Silan-terminated polymers
Physical state: Paste
Colour: grey
Odour: odourless
Initial boiling point and boiling range: < 34 °C
Flash point: > 180 °C
Vapour pressure (20 °C): = 100 Pa
Density (20 °C): 1.6527 g/cm³
Relative density (20 °C): 1.653
Self ignition temperature: ≈ 420 °C
Curing method: Exposure to air humidity
Non-slump properties: Non-slump; < 2mm
Extrusion rate: > 100 g/min
Specific weight: 1.1 g/cm³
Skinforming time: 15 minutes
Curing rate: 3mm/24 hours
Shrinkage: < 3%
Tensile strength: 2.5 N/mm²
Elongation at break: 500%
Shore A Hardness: 45
Movement capability: 10% relative to the initial width of the joint
Chemical resistance
Good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, lyes
Temperature resistance: -40°C to +100°C
Application temperature: +5°C to +40°C (substrate temperature)
Storeage temperature: +5°C to 25°C
TECH-MASTERS Group
We use our own and third-party cookies to personalize content and advertisements, to be able to offer functions for social media and to analyze access to our website. The cookies are described in more detail under "Cookie Settings" and can be activated or deactivated. By clicking on "Allow all cookies" you agree to their use. You can subsequently change your cookie settings on the "Privacy Policy" page. Additional Information: Privacy policy incl. cookie settings | General terms and conditions
