Menu
Region:
no location selected Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group
« ADHESIVES AND SEALANTS

Seal Tech AC

SEAL TECH AC is a professional, plasto-elastic acrylic sealant based on water dispersion and is suitable for low- and medium-stress connection and expansion joints. SEAL TECH AC has a wide range of adhesion properties on standard building substrates and can also be used to fill and smooth indentations, cracks, drill holes, and other repair work. SEAL TECH AC can be painted, varnished, and plastered over.Wet-on-wet processing is possible if required. SEAL TECH AC impresses with its low volume loss during curing, is low-odor, and allows primer-free adhesion. SEAL TECH AC is buildable and has good aging stability. SEAL TECH AC can be used indoors and is UV-resistant. SEAL TECH AC is free of solvents, isocyanates, and silicones.

  • Wide range of adhesion on standard building substrates
  • For low and medium stress connection and expansion joints
  • For filling and smoothing indentations, cracks, drill holes, and other repair work
  • Can be painted, varnished, and plastered over
  • Can be processed wet-on-wet - economical to use
  • Low volume loss during curing
  • Low odor
  • Primer-free adhesion
  • Can be built up
  • Free of solvents, isocyanates, and silicones
  • UV-resistant
  • Very good aging stability
  • Suitable for indoor use
Article nr Name Content
T567101 Seal Tech AC white 310ml 310ml
T569000 TMT Caulking Gun 26:1 1pc.
T569001 Nozzle 360° (6pcs) 6pcs.
T569100 TMT Caulking Drill Adaptor 1pc.
T579001 Seal Tech Finisher 1l 1l

  • Technical data
  • Application and usage
  • Downloads
Material: Thixotropic paste
Type: Water based acrylic sealant
Aggregate State: pasty
Colour: white
Odour: characteristic
pH: 3,5 - 5
Specific gravity: Approx. 1.70 g/ml
Skin forming time: Approx. 20 min. (at 23°C; 50% R.H.)
Application temperature range: +5°C to +40°C#-#-#

PROPERTIES OF THE CURED PRODUCT (at 23°C; 50% R.H.):
Service temperature: -20°C to + 80°C
Shore A Hardness (ISO 868): Approx. 30 (6mm thick film)
Max. Tensile (ISO 37): Approx. 0.40 MPa
Elongation at break (ISO 37): > 120 %
  • APPLICATION:
    For sealing interior finishing joints for walls, partitions, ceiling and skirting boards.
    Connection joints on windowsills, between masonry, etc.
    For filling cracks, board joints, around shutter formwork, etc.
    Suitable for bonding expanded polystyrene on absorbent substrates.
    Suitable on all usual porous building substrates.
  • USE:
    After substrate preparation, apply SEAL TECH AC with the TMT CAULKING GUN. The sealant should be smoothed using a tool moistened with water before skinning for a perfect sealant surface. Smoothing is not only recommended for aesthetic reasons, but also guarantees close contact and good adhesion to the substrate.
    Remove any masking tape used immediately after smoothing. Fresh product and tools can be cleaned with water.
    It should not be applied on bituminous or tar containing substrates, and to materials that bleed oils or plasticizers. It must not be used in contact with untreated metals (oxidation risk).
pdf Product Information
techmasters_en_set-ac_PDS.pdftechmasters_en_set-ac_PDS.pdf (1.9 MB)
pdf MSDS T567101 Seal Tech AC white 310ml V4
MSDS_T567101_Seal_Tech_AC_white_310ml_T567101_V4_en_AT.pdfMSDS_T567101_Se...01_V4_en_AT.pdf (307.8 KB)

Seal Tech AC

SEAL TECH AC is a professional, plasto-elastic acrylic sealant based on water dispersion and is suitable for low- and medium-stress connection and expansion joints. SEAL TECH AC has a wide range of adhesion properties on standard building substrates and can also be used to fill and smooth indentations, cracks, drill holes, and other repair work. SEAL TECH AC can be painted, varnished, and plastered over.Wet-on-wet processing is possible if required. SEAL TECH AC impresses with its low volume loss during curing, is low-odor, and allows primer-free adhesion. SEAL TECH AC is buildable and has good aging stability. SEAL TECH AC can be used indoors and is UV-resistant. SEAL TECH AC is free of solvents, isocyanates, and silicones.

  • Wide range of adhesion on standard building substrates
  • For low and medium stress connection and expansion joints
  • For filling and smoothing indentations, cracks, drill holes, and other repair work
  • Can be painted, varnished, and plastered over
  • Can be processed wet-on-wet - economical to use
  • Low volume loss during curing
  • Low odor
  • Primer-free adhesion
  • Can be built up
  • Free of solvents, isocyanates, and silicones
  • UV-resistant
  • Very good aging stability
  • Suitable for indoor use
Article nr Name Content
T567101 Seal Tech AC white 310ml 310ml
T569000 TMT Caulking Gun 26:1 1pc.
T569001 Nozzle 360° (6pcs) 6pcs.
T569100 TMT Caulking Drill Adaptor 1pc.
T579001 Seal Tech Finisher 1l 1l

  • Technical data
  • Application and usage
  • Downloads
Material: Thixotropic paste
Type: Water based acrylic sealant
Aggregate State: pasty
Colour: white
Odour: characteristic
pH: 3,5 - 5
Specific gravity: Approx. 1.70 g/ml
Skin forming time: Approx. 20 min. (at 23°C; 50% R.H.)
Application temperature range: +5°C to +40°C#-#-#

PROPERTIES OF THE CURED PRODUCT (at 23°C; 50% R.H.):
Service temperature: -20°C to + 80°C
Shore A Hardness (ISO 868): Approx. 30 (6mm thick film)
Max. Tensile (ISO 37): Approx. 0.40 MPa
Elongation at break (ISO 37): > 120 %
  • APPLICATION:
    For sealing interior finishing joints for walls, partitions, ceiling and skirting boards.
    Connection joints on windowsills, between masonry, etc.
    For filling cracks, board joints, around shutter formwork, etc.
    Suitable for bonding expanded polystyrene on absorbent substrates.
    Suitable on all usual porous building substrates.
  • USE:
    After substrate preparation, apply SEAL TECH AC with the TMT CAULKING GUN. The sealant should be smoothed using a tool moistened with water before skinning for a perfect sealant surface. Smoothing is not only recommended for aesthetic reasons, but also guarantees close contact and good adhesion to the substrate.
    Remove any masking tape used immediately after smoothing. Fresh product and tools can be cleaned with water.
    It should not be applied on bituminous or tar containing substrates, and to materials that bleed oils or plasticizers. It must not be used in contact with untreated metals (oxidation risk).
pdf Product Information
techmasters_en_set-ac_PDS.pdftechmasters_en_set-ac_PDS.pdf (1.9 MB)
pdf MSDS T567101 Seal Tech AC white 310ml V4
MSDS_T567101_Seal_Tech_AC_white_310ml_T567101_V4_en_AT.pdfMSDS_T567101_Se...01_V4_en_AT.pdf (307.8 KB)
1. Choose location
no location selected
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group
2. Cookies

We use our own and third-party cookies to personalize content and advertisements, to be able to offer functions for social media and to analyze access to our website. The cookies are described in more detail under "Cookie Settings" and can be activated or deactivated. By clicking on "Allow all cookies" you agree to their use. You can subsequently change your cookie settings on the "Privacy Policy" page. Additional Information:  Privacy policy incl. cookie settings | General terms and conditions

Accept cookies

Cookie Settings

×
  • What are cookies?
  • Required Cookies
  • Performance Cookies
  • Marketing Cookies

What are cookies?

Cookies are text files that are stored by a browser on the end device to store certain information. With this information, our website recognizes that you have already visited it. We use this to prepare the information accordingly. Your personal data will not be saved.

Required Cookies

These cookies control functions without which our website cannot be used to its full extent. These cookies are only used by us (our own cookies). As a result, this information is only used and processed by our website. For example, you don't have to log in again every time you log in.

Performance Cookies

“Google Analytics” and “Google Tag Manager” are used to collect information on how our website is used. These cookies help us, for example, to determine whether and which sub-pages of our website are visited and what content the users are interested in. We primarily record the number of visits and their duration. Note on data processing in the USA: According to the case law of the European Court of Justice (judgement of July 16, 2020, case ref.: C-311/18 (“Schrems II”)) no adequate level of data protection exists in the USA. In addition, government surveillance measures in the USA may result where no adequate legal protection can be sought against these measures. In particular, US security and secret services may have access to your data without you being informed and without you being able to take legal action against it. The data processing in the USA in connection with the data processed by Tech-Masters Trading GmbH is based on your consent in the sense of Art. 49 para. 1 lit a) in conjunction with Art. 6 para. 1 lit a) GDPR. You can revoke your consent at any time non-retroactively. Understanding the above information on data protection in the USA, I also consent to the processing of personal data in the USA if and to the extent that I give my consent to the use of cookies via configuration of the cookie settings. I may revoke my consent at any time non-retroactively.

Marketing Cookies

We show "Youtube" videos for some products. This marketing cookie comes from Google and collects information about the websites visited by the user in order to create targeted advertising for the visitor. In this context, we do not process any personal data without your consent in accordance with Article 6 (1) (a) GDPR.

Error
/var/www/www.tech-masters.com/module/Application/src/Application/Controller/BaseController.php:67
strtolower(): Passing null to parameter #1 ($string) of type string is deprecated: 8192