TECH-MASTERS Group
Changing region
SEAL TECH 60 is a sealant based on MS polymer specially designed sealing and bonding applications. SEAL TECH 60 is odourless and can be applied indoor and outdoor. Due to its special formulation SEAL TECH 60 offers perfect bonding on all kinds of material like metals, aluminium, wood, glass, stone and laquered surfaces. It can be used in very thin layers or overlapped (even if hardend) until 15 to 20 mm. It can be painted, also wet on wet.
| Article nr | Name | Content |
|---|---|---|
| T530106 | Seal Tech 60 grey 290ml | 290ml |
| T530206 | Seal Tech 60 white 290ml | 290ml |
| T530306 | Seal Tech 60 black 290ml | 290ml |
| T530406 | Seal Tech 60 brown 290ml | 290ml |
| T530906 | Seal Tech 60 beige 290ml | 290ml |
| T569000 | TMT Caulking Gun 26:1 | 1pc. |
» To the shop
Base: MS polymere
Physical state: Paste
RAL colors: beige 1013, grey 7004, brown 8007,
white 9010, black 9011
Odour: odourless
Boiling point (at atmospheric pressure): < 34°C
Vapour pressure (at 20°C): 100 Pa
Density (at 20°C): 1,6527 g/cm³
Relative density (at 20ºC): 1,653
Solubility properties: Soluble in organic solvents
Flash Point: > 180ºC
Autoignition temperature: ≈ 420ºC
Flow: 5 bar/3 mm/23°C 140 g/min
Skin cure: 23°C 50% R.V. 8 minutes
Non-adhering: 23°C 50% R.V. 25 minutes
Full cure time: 23°C 50% R.V
24 hours - 6 mm / 48 hours - 7 mm / 72 hours - 8 mm
Max. allowable deformation 12,5% (according to ISO 9046)
Expansion joints for ISO 11600 F 12,5% HME construction
Volume shrinkage after cure: < 3%
Hardness - DIN 53505: 58 Shore A
Tensile Strength: after 7 days: 260 N/cm², after 1 month: 280 N/cm², after 3 months: 310 N/cm²
Tear Strength: 140 N/cm² DIN 53507
Adherence: to most surfaces. Attention: bad adherence to PE, PP, silicones,...
Thermal stability: -40°C till +95°C. Short period for powder coating process to +200°C
Elongation at rupture -DIN 53504: > 350%
Contains no isocyanates: non-toxic
Application temperature: from +5°C up to +40°C
Chemical resistance:
good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, lyes
moderate: esters, ketones, aromatics; for more information, see chemical resistance list
bad: concentrated acids, chlorinated solvents and swimmingpool water
Electrical resistance: 10^10 Ohm
Pressure resistance (ISO 11432): 1,19 N/mm²
UV and weather resistant
Water vapour transmission (DIN EN ISO 12572): 1,6
Shelf life: 18 months, keep dry, cool and frost-free
SEAL TECH 60 is a sealant based on MS polymer specially designed sealing and bonding applications. SEAL TECH 60 is odourless and can be applied indoor and outdoor. Due to its special formulation SEAL TECH 60 offers perfect bonding on all kinds of material like metals, aluminium, wood, glass, stone and laquered surfaces. It can be used in very thin layers or overlapped (even if hardend) until 15 to 20 mm. It can be painted, also wet on wet.
| Article nr | Name | Content |
|---|---|---|
| T530106 | Seal Tech 60 grey 290ml | 290ml |
| T530206 | Seal Tech 60 white 290ml | 290ml |
| T530306 | Seal Tech 60 black 290ml | 290ml |
| T530406 | Seal Tech 60 brown 290ml | 290ml |
| T530906 | Seal Tech 60 beige 290ml | 290ml |
| T569000 | TMT Caulking Gun 26:1 | 1pc. |
» To the shop
Base: MS polymere
Physical state: Paste
RAL colors: beige 1013, grey 7004, brown 8007,
white 9010, black 9011
Odour: odourless
Boiling point (at atmospheric pressure): < 34°C
Vapour pressure (at 20°C): 100 Pa
Density (at 20°C): 1,6527 g/cm³
Relative density (at 20ºC): 1,653
Solubility properties: Soluble in organic solvents
Flash Point: > 180ºC
Autoignition temperature: ≈ 420ºC
Flow: 5 bar/3 mm/23°C 140 g/min
Skin cure: 23°C 50% R.V. 8 minutes
Non-adhering: 23°C 50% R.V. 25 minutes
Full cure time: 23°C 50% R.V
24 hours - 6 mm / 48 hours - 7 mm / 72 hours - 8 mm
Max. allowable deformation 12,5% (according to ISO 9046)
Expansion joints for ISO 11600 F 12,5% HME construction
Volume shrinkage after cure: < 3%
Hardness - DIN 53505: 58 Shore A
Tensile Strength: after 7 days: 260 N/cm², after 1 month: 280 N/cm², after 3 months: 310 N/cm²
Tear Strength: 140 N/cm² DIN 53507
Adherence: to most surfaces. Attention: bad adherence to PE, PP, silicones,...
Thermal stability: -40°C till +95°C. Short period for powder coating process to +200°C
Elongation at rupture -DIN 53504: > 350%
Contains no isocyanates: non-toxic
Application temperature: from +5°C up to +40°C
Chemical resistance:
good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, lyes
moderate: esters, ketones, aromatics; for more information, see chemical resistance list
bad: concentrated acids, chlorinated solvents and swimmingpool water
Electrical resistance: 10^10 Ohm
Pressure resistance (ISO 11432): 1,19 N/mm²
UV and weather resistant
Water vapour transmission (DIN EN ISO 12572): 1,6
Shelf life: 18 months, keep dry, cool and frost-free
TECH-MASTERS Group
We use our own and third-party cookies to personalize content and advertisements, to be able to offer functions for social media and to analyze access to our website. The cookies are described in more detail under "Cookie Settings" and can be activated or deactivated. By clicking on "Allow all cookies" you agree to their use. You can subsequently change your cookie settings on the "Privacy Policy" page. Additional Information: Privacy policy incl. cookie settings | General terms and conditions
