Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Safety Grip Spray

SAFETY GRIP SPAY is a transparent coating
with anti-slip-particles.
SAFETY GRIP SPAY is ideal for floors, steps,
balustrade, handles and all other applications
where surfaces have to be prepared with
a safe grip. For all out- and indoors applications and for most surfaces like cement, stone, screed, asphalt, clinker, ceramictile, metal and so on.  
SAFETY GRIP SPRAY  is your product for preparing a safe and anti-slip surface.

  • Make all surfaces anti-slip
  • Transparent colour
  • Simple, time saving application
  • Removable
  • Good UV resistance
  • Part-time and permanent use
  • Can be colored with acrylic paint
Article nr Name Content
T166001 Safety Grip Spray 400ml 400ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Aerosol
Colour: According to product designation
Odor: Characteristic
Degree of gloss: (at measurement angle 60°
acc. to DIN 67530) glossy: >15 gloss units
Efficiency: Depending on consistence and color
of the ground: 500 ml are sufficient for 1,5 - 2,5 m²
Drying time (at 20°C, 50% relative air humidity):
Dust-dry: after approx. 10 minutes
Dry to touch: after approx. 30 minutes
Ignition temperature: 333°C
Lower explosion limit: 1 Vol%
Upper explosion limit: 13 Vol%
Water solubility: Immiscible

Vapour pressure (at 20°C): 2,100 hPa
Density (at 20°C): 0.8 g/cm³
Organic solvents: 88%
VOC-content: 660,0 g/l (88,01%)
Solids content: 12%
The drying time depends on surrounding
temperature, air humidity and thickness of the
applied coat.
Temperature resistance: to 80°C
UV resistance: good
Shelf life: 10 years if appropriate storage provided
(= 10°C - 25°C, relative air humidity of max. 60%
 

  • The surface must be clean, free of gease and dust
  • Shake can carefully for 2 minutes
  • Carry out spray for testing.
  • The structural density and effect is depending on the number of coats and the spraying distance
  • Apply several thin layers
  • Can be colored with all acrylic paints (wet in wet)
  • Safety Grip Spray can be removed by Supersolv, Powersolv or Megaclean

Safety Grip Spray

SAFETY GRIP SPAY is a transparent coating
with anti-slip-particles.
SAFETY GRIP SPAY is ideal for floors, steps,
balustrade, handles and all other applications
where surfaces have to be prepared with
a safe grip. For all out- and indoors applications and for most surfaces like cement, stone, screed, asphalt, clinker, ceramictile, metal and so on.  
SAFETY GRIP SPRAY  is your product for preparing a safe and anti-slip surface.

  • Make all surfaces anti-slip
  • Transparent colour
  • Simple, time saving application
  • Removable
  • Good UV resistance
  • Part-time and permanent use
  • Can be colored with acrylic paint
Article nr Name Content
T166001 Safety Grip Spray 400ml 400ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Aerosol
Colour: According to product designation
Odor: Characteristic
Degree of gloss: (at measurement angle 60°
acc. to DIN 67530) glossy: >15 gloss units
Efficiency: Depending on consistence and color
of the ground: 500 ml are sufficient for 1,5 - 2,5 m²
Drying time (at 20°C, 50% relative air humidity):
Dust-dry: after approx. 10 minutes
Dry to touch: after approx. 30 minutes
Ignition temperature: 333°C
Lower explosion limit: 1 Vol%
Upper explosion limit: 13 Vol%
Water solubility: Immiscible

Vapour pressure (at 20°C): 2,100 hPa
Density (at 20°C): 0.8 g/cm³
Organic solvents: 88%
VOC-content: 660,0 g/l (88,01%)
Solids content: 12%
The drying time depends on surrounding
temperature, air humidity and thickness of the
applied coat.
Temperature resistance: to 80°C
UV resistance: good
Shelf life: 10 years if appropriate storage provided
(= 10°C - 25°C, relative air humidity of max. 60%
 

  • The surface must be clean, free of gease and dust
  • Shake can carefully for 2 minutes
  • Carry out spray for testing.
  • The structural density and effect is depending on the number of coats and the spraying distance
  • Apply several thin layers
  • Can be colored with all acrylic paints (wet in wet)
  • Safety Grip Spray can be removed by Supersolv, Powersolv or Megaclean