Safe Clean

Article nr	Name	Content
T204001	Safe Clean Aerosol 500ml	500ml
T204005	Safe Clean 5l	5l
T204025	Safe Clean 25l	25l
T204101	Safe Clean NSF 500ml	500ml

AEROSOL:
Colour: According to product designation
Odour: characteristic
pH: Mixture is not polar/aprotic.
Initial boiling point and boiling range: 82°C (propan-2-ol)
Lower explosion limit: 0,6 Vol%
Upper explosion limit: 12 Vol%
Flash point: 13°C
Auto-ignition temperature: 270°C
Vapour pressure (at 20°C): 1 hPa
Density (at 20 °C): 0,79 g/cm³
Water solubility: Not miscible or only slightly miscible.
Aerosols: Extremely flammable aerosol. Pressurized container: May burst if heated.

AEROSOL NSF:
Physical state: Aerosol
Colour: According to product designation
Odour: characteristic
Initial boiling point and boiling range: 82 °C
Flash point: -9 °C
Auto-ignition temperature: > 200 °C
Upper/lower flammability or explosive limits: 0.8 – 12 Vol-%
Vapour pressure (at 20 °C): 5,500 hPa
Density (at 20 °C): 0.72 g/cm³
Kinematic viscosity (at 40 °C) : 20.5 mm²/s

LIQUID:
Colour: According to product designation
Odour: characteristic
pH: Mixture is not polar/aprotic.
Initial boiling point and boiling range: 82°C (propan-2-ol)
Flash point: 13°C
Auto-ignition temperature: 270 °C
Lower explosion limit: 0,6 Vol%
Upper explosion limit: 7 Vol%
Density(at 20°C): 0,771 g/cm³
Vapour Pressure (at 20°C): 1hPa
Solubility in water: Not miscible or only slightly miscible.
Flammability: Highly flammable
Shelf life: 12 months, keep dry, cool and frost-proof.
Safety measures: consult the Safety Data Sheet.

AUTOMOTIVE
Degreasing and cleaning mechanical parts, motor, brakes, suspension.
Cleaning tools and workshop equipment - does not attack plastics.
Removal of stickers of masking tape adhesive residues.
Removal of previous grease layers before relubricating, e.g. door hinges.
Safe Clean does not corrode the paint.
Removal of trims and bumper strips without damaging.
Removal of tar and other coating stains from both bodywork and plastic parts.
Removal of grease and oil stains from seat upholstery (always test first for colourfastness).
Cleaning of paint and undercoat before spray-painting (always use a 2-cloth system).

INDUSTRY
Degreasing and cleaning mechanical parts of motors and machines.
Degreasing and cleaning tools and workshop equipment, hand tools and machines.
Cleaning rubber rolls in printers.
Quick and safe degreasing of ferrous and non-ferrous metals before bonding or painting.
SAFE CLEAN will not form an oxide layer with light metals.
Removal of stickers or labels adhesive residues.
Removal of grease and oil stains from textile (always test first the colour fastness).
Removal of contact adhesive residues on formica in kitchen and furniture manufacturing.
Removal of previous grease and oil layers before relubricating.