Region:

TECH-MASTERS Group Changing region

TECH-MASTERS Austria
TECH-MASTERS Germany
TECH-MASTERS Croatia
TECH-MASTERS Czech
TECH-MASTERS Poland
TECH-MASTERS Slovakia
TECH-MASTERS Hungary
TECH-MASTERS Romania
TECH-MASTERS Slovenia
TECH-MASTERS Italia
TECH-MASTERS Group

+43 7242 9396 1650

sales@tech-masters.com

« ADHESIVES AND SEALANTS

PUR Foam

PUR FOAM is a ready-to-use one-component polyurethane foam for various construction applications such as filling holes, sealing joints or for thermal and noise insulation. PUR FOAM has a very good volume expansion for effective filling. Due to its good adhesive properties it can be used for bonding window sills and trims, plasterboard details, etc. PUR FOAM does not shrink after curing thus the risk of deformation of joints and separation from the surface is minimal. PUR FOAM adheres well to most materials such as wood, concrete, stone, plaster, metal, PVC and polystyrene.

Fire resistance properties - B2 fire class according to DIN 4102-1
High thermal and noise insulation values
Good volume expansion for effective filling
Very good adhesive properties
Filling holes
Insulation of penetrations
Bonding of window sills and claddings, plasterboard details, etc.
Sealing of thermal and noise insulation boards
Sealing and bonding of joints
Reducing the effect of thermal bridges

Article nr	Name	Content
T670701	PUR Foam Cleaner 500ml	500 ml

» To the shop

Technical data
Application and usage
Downloads

Aggregate State: Aerosol
Colour: light yellow
Initial boiling point and boiling range: -12 °C
Vapour pressure: < 300 kPa (50 °C)
Density: 975 kg/m³ (20 °C)
Gluing time (TM 1014): 8-12min
Cutting time (TM 1005): < 60min
Fully cured in joint, 3x5cm (+23°C): < 16h
Curing pressure (TM 1009,
moistened surfaces): < 7.5kPa
Density in joint, 3x10cm (WGM106): 21-25kg/m3
Temperature resistance of cured foam: -50°C - +90°C
Fire class of cured foam (DIN 4102-1): B2

Compressive strength (TM 1011,
moistened surfaces): > 35kPa
Shear strength (TM 1012,
moistened surfaces): > 45kPa
Thermal conductivity (EN 12667, TM 1020): 0.033W/(m*K)
Sound reduction index Rst,w (EN ISO 10140): 62dB
Application temperature: from +5°C up to +30°C
Water vapor permeability (EN 12086):
< 0.04mg/(m*h*Pa)
Shelf life: 12 months in unopened packaging
Storage: cool and dry at temperatures between 5°C and 30°C

Application temperature:
Air temperature during application: +5°C to +30°C, best results at +20°C. Can temperature during application: +5°C to +25°C, best results at +20°C.
Surface preparation:
Remove dust, loose particles and grease from surfaces. Moisten dry surfaces to achieve better results. Protect adjacent surfaces with paper, foil or other suitable material.
Application method:
Hold the foam can in a vertical position. Screw the adapter tube onto the valve of the foam can. Shake the can vigorously at least 20 times. To use, turn the can upside down and press the trigger of the adapter tube. Use the adapter tube trigger to regulate foam output. When applying foam in layers, moisten slightly between each layer.
Cleaning:
Uncured foam can be removed with PUR FOAM CLEANER, cured foam can be removed mechanically.
Restrictions:
The foam will not adhere to teflon, polyethylene and silicone surfaces. Cured foam is sensitive to UV light and direct sunlight and therefore must be covered with opaque sealant, filler, paint or other material. Lighter structural elements must be firmly fixed before applying foam due to the high post-expansion of the formula.

pdf Product Information
techmasters_en_pur_PDS.pdftechmasters_en_pur_PDS.pdf (384.0 KB)

pdf EC1 Plus DE
techmasters_en_pur_EC 1 PLUS_PUR Foam_de_INFO.pdftechmasters_en_...oam_de_INFO.pdf (218.8 KB)

pdf EC1 Plus EN
techmasters_en_pur_EC 1 PLUS_PUR Foam_en_INFO.pdftechmasters_en_...oam_en_INFO.pdf (230.6 KB)

PUR Foam

Fire resistance properties - B2 fire class according to DIN 4102-1
High thermal and noise insulation values
Good volume expansion for effective filling
Very good adhesive properties
Filling holes
Insulation of penetrations
Bonding of window sills and claddings, plasterboard details, etc.
Sealing of thermal and noise insulation boards
Sealing and bonding of joints
Reducing the effect of thermal bridges

Article nr	Name	Content
T670701	PUR Foam Cleaner 500ml	500 ml

» To the shop

Technical data
Application and usage
Downloads

Application temperature:
Air temperature during application: +5°C to +30°C, best results at +20°C. Can temperature during application: +5°C to +25°C, best results at +20°C.
Surface preparation:
Remove dust, loose particles and grease from surfaces. Moisten dry surfaces to achieve better results. Protect adjacent surfaces with paper, foil or other suitable material.
Application method:
Hold the foam can in a vertical position. Screw the adapter tube onto the valve of the foam can. Shake the can vigorously at least 20 times. To use, turn the can upside down and press the trigger of the adapter tube. Use the adapter tube trigger to regulate foam output. When applying foam in layers, moisten slightly between each layer.
Cleaning:
Uncured foam can be removed with PUR FOAM CLEANER, cured foam can be removed mechanically.
Restrictions:
The foam will not adhere to teflon, polyethylene and silicone surfaces. Cured foam is sensitive to UV light and direct sunlight and therefore must be covered with opaque sealant, filler, paint or other material. Lighter structural elements must be firmly fixed before applying foam due to the high post-expansion of the formula.

pdf Product Information
techmasters_en_pur_PDS.pdftechmasters_en_pur_PDS.pdf (384.0 KB)

pdf EC1 Plus DE
techmasters_en_pur_EC 1 PLUS_PUR Foam_de_INFO.pdftechmasters_en_...oam_de_INFO.pdf (218.8 KB)

pdf EC1 Plus EN
techmasters_en_pur_EC 1 PLUS_PUR Foam_en_INFO.pdftechmasters_en_...oam_en_INFO.pdf (230.6 KB)

PUR Foam

PUR Foam

What are cookies?

Required Cookies

Performance Cookies

Marketing Cookies

PUR Foam

PUR Foam

1. Choose location

2. Cookies

Cookie Settings

What are cookies?

Required Cookies

Performance Cookies

Marketing Cookies