Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Power Strip

POWER STRIP is a powerful high-performance strip spray for the removal of paints, varnishes, polyurethane and many more. By using POWER STRIP there is no need for sanding, brushing or cutting anymore.
Due to its special formulation, POWER STRIP can safely be used on various material like metal, masonry, glass, wood, stone,... POWER STRIP has a non-dripping tixotropic appearance which makes it ideal for the use on vertical surfaces.

  • No more sanding, brushing and cutting
  • Effectively removes paints, varnish, polyurethane, glue, sealings,...
  • Can be used on various material like wood, metal, masonry,...
  • Tixotropic - does not drip
  • Ideal for vertical surfaces
  • Works quick and is safe for users
Article nr Name Content
T495001 Power Strip 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Form: aerosol
Base: solvent mixture based on methylal, dioxolane, ketones, surfactants and paraffinic wax
Propellant: propane
Colour: translucent white
Odour: characteristic
Boiling point: -44,5°C
Flash point: -97°C
Auto-i​​​​​​Ignition temperature: 235°C

Lower explosion limit: 0,7 Vol%
Upper explosion limit: 19,9 Vol%
Density (at 20°C): 0,79 g/cm³
Water solubility: immiscible
Delivery rate (at 20°C): 2,4 g/sec
Application temperature: 10°C - 35°C
Shelf life: 12 months
Storage: cool (10 - 20°C) and dry

  • USE:
    - Shake can well before use.
    - Keep spray distance at 20-30cm and spray the area to be treated. 
    - Wait approx. 25 minutes for paint or varnish to blister.
    - Remove the blister and then apply a second coat. Leave for approx. 20 minutes.
    - Remove blistered or softened paint/varnish with a stripping knife. Use a shavehook or old nylon toothbrush in difficult areas.
    - Repeat the process if necessary.
    - Remove traces of stubbon or ingrained paint by applying a final light coat and rubbing with a wire tool.
    - Scrub down with liquid detergent in cold water (use white spirit on fine woods to avoid raising the grain).
    - Allow to dry thoroughly. Rub down with either fine sandpaper or wire wool.
  • APPLICATION:
    - For the removal of paints, undercoating
    - Can be used for stickers on parts, old packaging on various metal
    - Also removes hardened oils and carbon deposit on valve seats, cylinders and other engine parts
    - Strips of varnish, resin, paint, bitumen, graffiti on panels, windows, walls, boats, road builing tools, etc.

Power Strip

POWER STRIP is a powerful high-performance strip spray for the removal of paints, varnishes, polyurethane and many more. By using POWER STRIP there is no need for sanding, brushing or cutting anymore.
Due to its special formulation, POWER STRIP can safely be used on various material like metal, masonry, glass, wood, stone,... POWER STRIP has a non-dripping tixotropic appearance which makes it ideal for the use on vertical surfaces.

  • No more sanding, brushing and cutting
  • Effectively removes paints, varnish, polyurethane, glue, sealings,...
  • Can be used on various material like wood, metal, masonry,...
  • Tixotropic - does not drip
  • Ideal for vertical surfaces
  • Works quick and is safe for users
Article nr Name Content
T495001 Power Strip 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Form: aerosol
Base: solvent mixture based on methylal, dioxolane, ketones, surfactants and paraffinic wax
Propellant: propane
Colour: translucent white
Odour: characteristic
Boiling point: -44,5°C
Flash point: -97°C
Auto-i​​​​​​Ignition temperature: 235°C

Lower explosion limit: 0,7 Vol%
Upper explosion limit: 19,9 Vol%
Density (at 20°C): 0,79 g/cm³
Water solubility: immiscible
Delivery rate (at 20°C): 2,4 g/sec
Application temperature: 10°C - 35°C
Shelf life: 12 months
Storage: cool (10 - 20°C) and dry

  • USE:
    - Shake can well before use.
    - Keep spray distance at 20-30cm and spray the area to be treated. 
    - Wait approx. 25 minutes for paint or varnish to blister.
    - Remove the blister and then apply a second coat. Leave for approx. 20 minutes.
    - Remove blistered or softened paint/varnish with a stripping knife. Use a shavehook or old nylon toothbrush in difficult areas.
    - Repeat the process if necessary.
    - Remove traces of stubbon or ingrained paint by applying a final light coat and rubbing with a wire tool.
    - Scrub down with liquid detergent in cold water (use white spirit on fine woods to avoid raising the grain).
    - Allow to dry thoroughly. Rub down with either fine sandpaper or wire wool.
  • APPLICATION:
    - For the removal of paints, undercoating
    - Can be used for stickers on parts, old packaging on various metal
    - Also removes hardened oils and carbon deposit on valve seats, cylinders and other engine parts
    - Strips of varnish, resin, paint, bitumen, graffiti on panels, windows, walls, boats, road builing tools, etc.