Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Power Lube

POWER LUBE is an highly efficient anti-seize assembly lubricant. Due to the special combination of synthetic oils and pure metal particles it offers reliable protection against corrosion, seizing and cold welding. POWER LUBE penetrates even the smallest pores and cracks and forms a fine dividing film that is protective and long lasting. Thanks to the powerful lubricating charateristics of POWER LUBE assembled parts can easily be separated with standard tools, even after years. POWER LUBE is a heat conductor and cannot be destroyed. It resists temperatures ranging from -180°C to +1200°C. It may not be used on oxygen or acetylen installations. POWER LUBE is non-toxic and free from lead or nickel. POWER LUBE does not drip and is very economical in use.

  • Resists high pressure (230 N/mm²)
  • Contains no nickel - special blend of metal powders
  • High temperature resistance up to +1200°C
  • Protection against corrosion, seizing and cold welding
  • Reduces friction and wear - ball bearing effect
  • Resists water, chemical vapours, salt, solvents, atmospheric action, etc
  • Consistent visocity even in extreme circumstances
  • Saves time and money
  • Easier assembly and disassembly of parts
  • Economical in use
Article nr Name Content
T221002 Power Lube 120g 120g
T221005 Power Lube 200ml PP 200ml
T221101 Power Lube 400ml 400ml
T221302 Power Lube 500g ink. Pinsel 500g
T221404 Power Lube 1,8kg 1,8kg
Y221303 Lube PP Brush 12 pcs.
Y818001 Sprayhead Vario 1pc.

» To the shop
  • Technical data
  • Application and usage
  • Downloads

PASTE / PRESSURE PACK:
Colour: grey
Odour: characteristic (paste), benzene-like (presspack)
Basic oil: synthetic oil mixture
Flash point: closed cup: 170°C (paste), > closed cup 93,3°C [Product does not sustain combustion.] (presspack)
Flammability (solid, gas): Flammable in the presence of the following materials or conditions: open flames, sparks and static discharge. Slightly flammable in the presence of the following materials or conditions: heat (presspack)
Density (20°C): 1,2 g/cm³ 
Solubility(ies): Insoluble in the following materials: cold water and hot water
Viscosity: Kinematic (40°C): Not applicable (presspack)
Type of aerosol: spray (presspack)
OFW device coefficient of friction: 0,13
Friction total: 0,14 μ
Friction thread: 0,13 μ
Friction head bottom: 0,15 μ
VKA-TEST (DIN 51350) goods load: 4200 N
VKA-TEST (DIN 51350) welding load: 4400 N
VKA-TEST (DIN 51350) Spherical cap value (1Min/1000N): 0,5mm
Worked penetration (DIN ISO 2137): 310-340 1/10mm
Specific heat transfer capacity (20°C): 1,325 J/(g·K)
Thermal diffusivity (20°C): 0,355 mm²/s
Thermal conductivity (ISO 22007-4) (20°C): 0,546 W/m·K
Dielectric strength (DIN EN 60243-1) (20°C): 1,3 kV/mm
Sulfur content (DIN 514): < 0,1%
Water resistance (DIN 51807): 0-90
Pressure (DIN 53281-83): 230 N/mm²
Salt spray test: > 170h
Specific resistance: 1,2 x 10^15 Ohm/cm
Temperature resistance: -180°C to 1200°C
Shelf life: 24 months in original container
Storage: Keep container tightly closed. Do not store together with oxidizing agents. Store in a dry place at storage temperature.

AEROSOL:
Physical state: Aerosol
Colour: grey
Odour: Benzene-like
Basic oil: synthetic oil mixture
Upper/lower flammability or explosive limits: Lower 0,6%
Vapour pressure: 350 kPa (room temperature)
Density (20°C): 0,72 g/cm³
Solubility(ies): Insoluble in the following materials: cold water and hot water.
Type of aerosol: spray
Heat of combustion: 31,99 kJ/g
VKA-TEST (DIN 51350) goods load: 4200 N
VKA-TEST (DIN 51350) welding load: 4400 N
VKA-TEST (DIN 51350) Spherical cap value (1Min/1000N): 0,5mm
Worked penetration (DIN ISO 2137): 310-340 1/10mm
Water resistance (DIN 51807): 0-90
Pressure (DIN 53281-83): 230 N/mm²
Salt spray test: > 170h
Thermal conductivity: 0,3 W/m.K
Dielectric strength: 0,47 kV/mm
Temperature resistance: -180 to +1200°C
Shelf life: 24 months in original container
Storage: Keep container tightly closed. Do not store together with oxidizing agents. Store in a dry place at storage temperature.

  • PASTE/PRESSURE PACK:
    - Clean and degrease the surface.
    - Apply POWER LUBE paste evenly.
    - POWER LUBE is suitable only for assembly paste specific applications, it does not replace pure lubricants and greases.
    - Apply a good quantity of POWER LUBE with a brush, cloth or plastic sponge.
    - On threads it is important that POWER LUBE is applied down to the thread root to ensure a good sealing effect.
    - POWER LUBE must not be mixed.
  • AEROSOL:
    - POWER LUBE is suitable only for assembly paste specific applications, it does not replace pure lubricants and greases.
    - Clean and degrease the surface.
    - Shake can well before use.
    - Spray on at about 15 cm from surface.

Power Lube

POWER LUBE is an highly efficient anti-seize assembly lubricant. Due to the special combination of synthetic oils and pure metal particles it offers reliable protection against corrosion, seizing and cold welding. POWER LUBE penetrates even the smallest pores and cracks and forms a fine dividing film that is protective and long lasting. Thanks to the powerful lubricating charateristics of POWER LUBE assembled parts can easily be separated with standard tools, even after years. POWER LUBE is a heat conductor and cannot be destroyed. It resists temperatures ranging from -180°C to +1200°C. It may not be used on oxygen or acetylen installations. POWER LUBE is non-toxic and free from lead or nickel. POWER LUBE does not drip and is very economical in use.

  • Resists high pressure (230 N/mm²)
  • Contains no nickel - special blend of metal powders
  • High temperature resistance up to +1200°C
  • Protection against corrosion, seizing and cold welding
  • Reduces friction and wear - ball bearing effect
  • Resists water, chemical vapours, salt, solvents, atmospheric action, etc
  • Consistent visocity even in extreme circumstances
  • Saves time and money
  • Easier assembly and disassembly of parts
  • Economical in use
Article nr Name Content
T221002 Power Lube 120g 120g
T221005 Power Lube 200ml PP 200ml
T221101 Power Lube 400ml 400ml
T221302 Power Lube 500g ink. Pinsel 500g
T221404 Power Lube 1,8kg 1,8kg
Y221303 Lube PP Brush 12 pcs.
Y818001 Sprayhead Vario 1pc.

» To the shop
  • Technical data
  • Application and usage
  • Downloads

PASTE / PRESSURE PACK:
Colour: grey
Odour: characteristic (paste), benzene-like (presspack)
Basic oil: synthetic oil mixture
Flash point: closed cup: 170°C (paste), > closed cup 93,3°C [Product does not sustain combustion.] (presspack)
Flammability (solid, gas): Flammable in the presence of the following materials or conditions: open flames, sparks and static discharge. Slightly flammable in the presence of the following materials or conditions: heat (presspack)
Density (20°C): 1,2 g/cm³ 
Solubility(ies): Insoluble in the following materials: cold water and hot water
Viscosity: Kinematic (40°C): Not applicable (presspack)
Type of aerosol: spray (presspack)
OFW device coefficient of friction: 0,13
Friction total: 0,14 μ
Friction thread: 0,13 μ
Friction head bottom: 0,15 μ
VKA-TEST (DIN 51350) goods load: 4200 N
VKA-TEST (DIN 51350) welding load: 4400 N
VKA-TEST (DIN 51350) Spherical cap value (1Min/1000N): 0,5mm
Worked penetration (DIN ISO 2137): 310-340 1/10mm
Specific heat transfer capacity (20°C): 1,325 J/(g·K)
Thermal diffusivity (20°C): 0,355 mm²/s
Thermal conductivity (ISO 22007-4) (20°C): 0,546 W/m·K
Dielectric strength (DIN EN 60243-1) (20°C): 1,3 kV/mm
Sulfur content (DIN 514): < 0,1%
Water resistance (DIN 51807): 0-90
Pressure (DIN 53281-83): 230 N/mm²
Salt spray test: > 170h
Specific resistance: 1,2 x 10^15 Ohm/cm
Temperature resistance: -180°C to 1200°C
Shelf life: 24 months in original container
Storage: Keep container tightly closed. Do not store together with oxidizing agents. Store in a dry place at storage temperature.

AEROSOL:
Physical state: Aerosol
Colour: grey
Odour: Benzene-like
Basic oil: synthetic oil mixture
Upper/lower flammability or explosive limits: Lower 0,6%
Vapour pressure: 350 kPa (room temperature)
Density (20°C): 0,72 g/cm³
Solubility(ies): Insoluble in the following materials: cold water and hot water.
Type of aerosol: spray
Heat of combustion: 31,99 kJ/g
VKA-TEST (DIN 51350) goods load: 4200 N
VKA-TEST (DIN 51350) welding load: 4400 N
VKA-TEST (DIN 51350) Spherical cap value (1Min/1000N): 0,5mm
Worked penetration (DIN ISO 2137): 310-340 1/10mm
Water resistance (DIN 51807): 0-90
Pressure (DIN 53281-83): 230 N/mm²
Salt spray test: > 170h
Thermal conductivity: 0,3 W/m.K
Dielectric strength: 0,47 kV/mm
Temperature resistance: -180 to +1200°C
Shelf life: 24 months in original container
Storage: Keep container tightly closed. Do not store together with oxidizing agents. Store in a dry place at storage temperature.

  • PASTE/PRESSURE PACK:
    - Clean and degrease the surface.
    - Apply POWER LUBE paste evenly.
    - POWER LUBE is suitable only for assembly paste specific applications, it does not replace pure lubricants and greases.
    - Apply a good quantity of POWER LUBE with a brush, cloth or plastic sponge.
    - On threads it is important that POWER LUBE is applied down to the thread root to ensure a good sealing effect.
    - POWER LUBE must not be mixed.
  • AEROSOL:
    - POWER LUBE is suitable only for assembly paste specific applications, it does not replace pure lubricants and greases.
    - Clean and degrease the surface.
    - Shake can well before use.
    - Spray on at about 15 cm from surface.