Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Multi Tech Dry

MULTI TECH DRY is a high performance, dry lubricant for the treatment of mechanical parts of metal and plastic, where no residues of oil and grease are desired.
It has a very low friction factor and prevents parts from wear and sticking.
MULTI TECH DRY is suitable for parts which are liable to light load and low speed and can even be used as a release agent for moulds.

  • No residues of oil or grease
  • Very low friction factor
  • Excellent adhesion
  • Prevents wear and sticking
  • Suitable for parts which are liable to light load and low speed
  • Resistant to weather influences
  • Suitable as release agent for moulds, where the use of silicones is not desired
  • Directed jetspray
Article nr Name Content
T318001 Multi Tech Dry 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Aerosol
Basis: polytetrafluoretheen
Colour: whittish
Odour: solvent-like
Auto-ignition temperature: 285°C
Upper/lower flammability or explosive limits: 1.4 – 12 Vol-%
Density (at 20°C): 0,6 g/cm³

Yield: 1,74 g/sec
Vapour pressure (at 20°C): 3,500 hPa
Particle size: 5 μm
Temperature resistant: -50°C to +250°C
Drying time: approx. 5 minutes
Organix solvents: 99,8%
Solids content: 1,2%
 

  • APPLICATIONS:
    - Rails
    - Door locks
    - Zippers
    - Towing hooks
    - Oven hinges
    - Folding roofs
    - Safety belts
    - Seat rails
    - Window rails
  • USE:
    - MULTI TECH DRY should have room temperature, best processing temperature: 5 - 30°C
    - Shake the aerosol before use.
    - Apply MULTI TECH DRY in a thin layer
    - After evaportation of the solvent (approx. 1 min.) a protecting, dry PTFE film will remain

Multi Tech Dry

MULTI TECH DRY is a high performance, dry lubricant for the treatment of mechanical parts of metal and plastic, where no residues of oil and grease are desired.
It has a very low friction factor and prevents parts from wear and sticking.
MULTI TECH DRY is suitable for parts which are liable to light load and low speed and can even be used as a release agent for moulds.

  • No residues of oil or grease
  • Very low friction factor
  • Excellent adhesion
  • Prevents wear and sticking
  • Suitable for parts which are liable to light load and low speed
  • Resistant to weather influences
  • Suitable as release agent for moulds, where the use of silicones is not desired
  • Directed jetspray
Article nr Name Content
T318001 Multi Tech Dry 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Aerosol
Basis: polytetrafluoretheen
Colour: whittish
Odour: solvent-like
Auto-ignition temperature: 285°C
Upper/lower flammability or explosive limits: 1.4 – 12 Vol-%
Density (at 20°C): 0,6 g/cm³

Yield: 1,74 g/sec
Vapour pressure (at 20°C): 3,500 hPa
Particle size: 5 μm
Temperature resistant: -50°C to +250°C
Drying time: approx. 5 minutes
Organix solvents: 99,8%
Solids content: 1,2%
 

  • APPLICATIONS:
    - Rails
    - Door locks
    - Zippers
    - Towing hooks
    - Oven hinges
    - Folding roofs
    - Safety belts
    - Seat rails
    - Window rails
  • USE:
    - MULTI TECH DRY should have room temperature, best processing temperature: 5 - 30°C
    - Shake the aerosol before use.
    - Apply MULTI TECH DRY in a thin layer
    - After evaportation of the solvent (approx. 1 min.) a protecting, dry PTFE film will remain