Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Multi Tech Clear+

MULTI TECH CLEAR+ is a specially formulated lubricant based on acrylate copolymers and neutral synthetic oils, mixed with aliphatic and a small amount of aromatic petroleum distillates, which increase the penetration effect. MULTI TECH CLEAR+ contains PTFE to increase the service life and sliding resistance. Even in constant contact with water and weak acids MULTI TECH CLEAR+ retains its lubricating and protective properties. MULTI TECH CLEAR+ forms a thin polymer film that penetrates deeply into the objects to be lubricated to protect against corrosion. MULTI TECH CLEAR+ can be used in a wide temperature range without changing viscosity. Thanks to its high adhesion MULTI TECH CLEAR+ is highly resistant to pressure cleaning. The use of MULTI TECH CLEAR+ reduces friction and wear of the chain, thus extending the life of the chain by 10 times its normal length. MULTI TECH CLEAR+ is safe to use with rubber and plastics.

  • Ideal for heavy duty applications
  • Retains viscosity at temperatures between -45°C and +250°C
  • Strong adhesion
  • Transparent
  • Especially made for chains, joints and guides, rolling and friction bearings
  • Excellent resistance to oxidation and ageing
Article nr Name Content
T214003 Multi Tech Clear+ 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Form: aerosol
Colour: dull
Odour: characteristic
Flash point: -60°C
pH value: The mixture is not soluble (in water).
Vapour pressure (at 20°C): 3900 hPa
Density: 0.77 g/ml
VOC: 77.25%
Since the product is an aerosol therefore no boiling point can be given. 

Ignition temperature: 285°C
Flash point: -60°C
Explosion limits:
- Upper: 1.4 Vol.-%
- Lower: 10.9 % Vol.-%
Viscosity of after drying (at 40°C): >1000 mm²/s
Application temperature: -5°C to 40°C
Storage conditions: keep dry, cool and frost-proof.
Safety measures: consult the Safety Data Sheet.

  • APPLICATION:
    - MULTI TECH CLEAR+ is resistant against hot and cold water, steam, alkalines, acidic disinfectants, cleaning agents, friction and weather influences.
    - MULTI TECH CLEAR+ is ideal for a long-lasting lubrication and protection of chains, joints and guides, rolling and friction bearings in production lines.
  • USE:
    - Shake can well before use until the stirring balls can be heard.
    - Clean the area first with a solvent or alkaline cleaning agent such as MEGA FOAM or SAFE CLEAN.
    - Spray on evenly. Spray MULTI TECH CLEAR+ onto parts such as cables and chains and let it penetrate.
    - Afterwards wipe off the excess of lubricant with a clean fabric.
    NOTE: Do not use too much MULTI TECH CLEAR+ as thin layer with a relubrication (if needed) achieves better results than a thick layer of lubricant.

Multi Tech Clear+

MULTI TECH CLEAR+ is a specially formulated lubricant based on acrylate copolymers and neutral synthetic oils, mixed with aliphatic and a small amount of aromatic petroleum distillates, which increase the penetration effect. MULTI TECH CLEAR+ contains PTFE to increase the service life and sliding resistance. Even in constant contact with water and weak acids MULTI TECH CLEAR+ retains its lubricating and protective properties. MULTI TECH CLEAR+ forms a thin polymer film that penetrates deeply into the objects to be lubricated to protect against corrosion. MULTI TECH CLEAR+ can be used in a wide temperature range without changing viscosity. Thanks to its high adhesion MULTI TECH CLEAR+ is highly resistant to pressure cleaning. The use of MULTI TECH CLEAR+ reduces friction and wear of the chain, thus extending the life of the chain by 10 times its normal length. MULTI TECH CLEAR+ is safe to use with rubber and plastics.

  • Ideal for heavy duty applications
  • Retains viscosity at temperatures between -45°C and +250°C
  • Strong adhesion
  • Transparent
  • Especially made for chains, joints and guides, rolling and friction bearings
  • Excellent resistance to oxidation and ageing
Article nr Name Content
T214003 Multi Tech Clear+ 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Form: aerosol
Colour: dull
Odour: characteristic
Flash point: -60°C
pH value: The mixture is not soluble (in water).
Vapour pressure (at 20°C): 3900 hPa
Density: 0.77 g/ml
VOC: 77.25%
Since the product is an aerosol therefore no boiling point can be given. 

Ignition temperature: 285°C
Flash point: -60°C
Explosion limits:
- Upper: 1.4 Vol.-%
- Lower: 10.9 % Vol.-%
Viscosity of after drying (at 40°C): >1000 mm²/s
Application temperature: -5°C to 40°C
Storage conditions: keep dry, cool and frost-proof.
Safety measures: consult the Safety Data Sheet.

  • APPLICATION:
    - MULTI TECH CLEAR+ is resistant against hot and cold water, steam, alkalines, acidic disinfectants, cleaning agents, friction and weather influences.
    - MULTI TECH CLEAR+ is ideal for a long-lasting lubrication and protection of chains, joints and guides, rolling and friction bearings in production lines.
  • USE:
    - Shake can well before use until the stirring balls can be heard.
    - Clean the area first with a solvent or alkaline cleaning agent such as MEGA FOAM or SAFE CLEAN.
    - Spray on evenly. Spray MULTI TECH CLEAR+ onto parts such as cables and chains and let it penetrate.
    - Afterwards wipe off the excess of lubricant with a clean fabric.
    NOTE: Do not use too much MULTI TECH CLEAR+ as thin layer with a relubrication (if needed) achieves better results than a thick layer of lubricant.