Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Multi Tech 6

MULTI TECH 6 comprises four products in one: lubricant - anticorrosion - protectant - release fluid - water-repellent - anti-humidity - cleaning fluid.

  • Super Fast acting
  • Lubricant
  • Anticorrosion
  • Protectant
  • Release Fluid
  • Water-repellent - Anti Humidity
  • Cleaning Fluid
  • 360° Application
THE PRODUCT IS SAFE ON EVERYDAY MATERIALS!
  • Rubbers and Plastics
  • Metals
  • Textiles
  • Painted Surfaces
Article nr Name Content
T206001 Multi Tech 6 500ml 500ml
T206005 Multi Tech 6 5l 5l

» To the shop
  • Technical data
  • Application and usage
  • Downloads

AEROSOL
Physical state: Aerosol 
Colour: brown
Odour: sweetish
Initial boiling point: -40°C
Flash point: -80°C
Upper/lower flammability or explosive limits: 0.6 – 15 Vol-%
Density (at 20°C): 0,783 g/cm³
Kinematic viscosity: < 7 mm²/s
electric strength = 42 kV
Temperature resistance: - 30°C to +130°C

LIQUID
Physical state: Liquid
Colour: light brown
Odour: vanilla
Initial boiling point:  110°C
Flash point: 30°C ISO 3679
Upper/lower flammability or explosive limits: 0.5 – 7 Vol-%
Density (bei 20°C): 0,788 g/cm³
Kinematic viscosity (at 40°C): < 7 mm²/s DIN EN ISO 3104
Electric strenght: 42 kV

  • Lubricant - Anticorrosion - Protectant
    The product forms a durable film that
    provides protection agains water, frost,
    humidity and rust or oxidation: It protects
    metals and their microscopic imperfections.
  • Release Fluid
    Attacks rust and all other types of oxidation, facilitating the release of any locked, rusted or frozen component or mechanism.
  • Water-repellent - Anti Humidity
    Forms a protective film between the surface and the humidity.
  • Cleaning Fluid
    Its formula enables it to be used to clean all surfaces, eliminating grease and grime and preventing the formation of an oxidation layer.
  • USE
    Shake well before use (Aerosol) and apply product to surface to be treated, allow a contact rime of 1 minute and proceed and carry out the required action. Eliminates rust and oxidation. Loosens blocked mechanical functions. Drives out moisture on electrical contacts.

Multi Tech 6

MULTI TECH 6 comprises four products in one: lubricant - anticorrosion - protectant - release fluid - water-repellent - anti-humidity - cleaning fluid.

  • Super Fast acting
  • Lubricant
  • Anticorrosion
  • Protectant
  • Release Fluid
  • Water-repellent - Anti Humidity
  • Cleaning Fluid
  • 360° Application
THE PRODUCT IS SAFE ON EVERYDAY MATERIALS!
  • Rubbers and Plastics
  • Metals
  • Textiles
  • Painted Surfaces
Article nr Name Content
T206001 Multi Tech 6 500ml 500ml
T206005 Multi Tech 6 5l 5l

» To the shop
  • Technical data
  • Application and usage
  • Downloads

AEROSOL
Physical state: Aerosol 
Colour: brown
Odour: sweetish
Initial boiling point: -40°C
Flash point: -80°C
Upper/lower flammability or explosive limits: 0.6 – 15 Vol-%
Density (at 20°C): 0,783 g/cm³
Kinematic viscosity: < 7 mm²/s
electric strength = 42 kV
Temperature resistance: - 30°C to +130°C

LIQUID
Physical state: Liquid
Colour: light brown
Odour: vanilla
Initial boiling point:  110°C
Flash point: 30°C ISO 3679
Upper/lower flammability or explosive limits: 0.5 – 7 Vol-%
Density (bei 20°C): 0,788 g/cm³
Kinematic viscosity (at 40°C): < 7 mm²/s DIN EN ISO 3104
Electric strenght: 42 kV

  • Lubricant - Anticorrosion - Protectant
    The product forms a durable film that
    provides protection agains water, frost,
    humidity and rust or oxidation: It protects
    metals and their microscopic imperfections.
  • Release Fluid
    Attacks rust and all other types of oxidation, facilitating the release of any locked, rusted or frozen component or mechanism.
  • Water-repellent - Anti Humidity
    Forms a protective film between the surface and the humidity.
  • Cleaning Fluid
    Its formula enables it to be used to clean all surfaces, eliminating grease and grime and preventing the formation of an oxidation layer.
  • USE
    Shake well before use (Aerosol) and apply product to surface to be treated, allow a contact rime of 1 minute and proceed and carry out the required action. Eliminates rust and oxidation. Loosens blocked mechanical functions. Drives out moisture on electrical contacts.