BUCKET LIQUID:
Form: paste
Colour: white
Odour: characteristic
Oxidising: non-oxidising (by EC criteria)
Solubility in water: insoluble
Relative density: 1,15 - 1,25
BUCKET HARDENER:
Form: liquid
Odour: characteristic
Oxidising: non-oxidising (by EC criteria)
Solubility in water: insoluble
Flash point: 32°C
Base: unsaturated polyester resin
Base Material Temperature (°C) / Typical Gel Time (mins) / Min. Load Time (mins)
35°C / 3 min. / 25 min.
30°C / 4 min. / 30 min.
25°C / 6 min. / 45 min.
20°C / 8 min. / 60 min.
10°C / 15 min. / 90 min.
5°C / 20 min. / 120 min.
Walkable after 2 hours. Trafficable after 24 hours.
CARTRIDGE - PART A:
Physical state: solid
Colour: various
Appearance: paste
Odour: characteristic
Viscosity, dynamic: >100.000 cP
Vapour pressure: 1,5 hPa
Relative density: 1,71
CARTRIDGE - PART B:
Physical state: solid
Colour: beige, black, white, grey
Appearance: paste
Odour: barely perceptible odour
Melting point: 0°C
Oxidising properties: not oxidising
SADT: ≈ 50°C
Solubility: material insoluble in water
Relative density: 1,45 g/cm³
Base: unsaturated polyester resin
Gel time:
Around 8 minutes at 15°C.
Paintable after 1 hour. Walkable after 2 hours. Trafficable after 24 hours.
May be applied down to -10°C providing the cartridge temperature is +20°C.