Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Magic Wall

MAGIC WALL is a dispersion repair paint for dirty substrates such as walls or ceilings. It can be applied to any spots caused by grease, nicotine, soot, and water as well as stains of insects, coffee, bitumen, tar or crayons.

MAGIC WALL can be used on surfaces such as polystyrene, wallpaper, old wall paint or plast.
MAGIC WALL has a very good efficienty covering up to 1 m² with one spray can.
MAGIC WALL can be used in indoor areas as well as outdoor.

  • Can be used indoor and outdoor
  • Water-based
  • Very good efficiency (up to 1 m² / spray can)
  • High covering power
  • Odourless
  • Excellent insulating effect
  • Recoatable with dispersion colours
Article nr Name Content
T250001 Magic Wall 200ml 200ml
Y909001 Spray Boy 1pc.

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Aerosol
Colour: According to product designation
Odour: characteristic
Ignition temperature: 240 °C
Upper/lower flammability or explosive limits: 3.3 – 26.2 Vol-%
Vapour pressure (at 20°C): 4000 hPa
Density (at 20°C): 1 g/cm³

Drying time (at 20°C, 55% relative air humidity):
Dust-dry: after approx. 30 minutes
Dry to touch: after approx. 40 minutes
Recoatable: after approx. 2 hours
Temperature resistance: approx. 90°C
VOC content: 424.5 g/l (29.80%)
Storage: 24 months at 8°C to 30°C, 30-75% relative air humidity

  • USE:
    - for dirty substrates such as walls or ceilings
    - applicable for spots caused by grease, nicotine, soot or water as well as stains of insects, coffee, bitumen, tar or crayons
    - can be used on surfaces such as polystyrene, wallpaper, old wall paint or plaster
  • APPLICATION:
    - Shake the can for 2 minutes before use
    - Surface must be dry and clean
    - Initially test spray on an inconspicuous place
    - Apply from a distance of approx. 25 cm several thin cross-coats
    - To increase insulating effect, let the surface dry

Magic Wall

MAGIC WALL is a dispersion repair paint for dirty substrates such as walls or ceilings. It can be applied to any spots caused by grease, nicotine, soot, and water as well as stains of insects, coffee, bitumen, tar or crayons.

MAGIC WALL can be used on surfaces such as polystyrene, wallpaper, old wall paint or plast.
MAGIC WALL has a very good efficienty covering up to 1 m² with one spray can.
MAGIC WALL can be used in indoor areas as well as outdoor.

  • Can be used indoor and outdoor
  • Water-based
  • Very good efficiency (up to 1 m² / spray can)
  • High covering power
  • Odourless
  • Excellent insulating effect
  • Recoatable with dispersion colours
Article nr Name Content
T250001 Magic Wall 200ml 200ml
Y909001 Spray Boy 1pc.

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Aerosol
Colour: According to product designation
Odour: characteristic
Ignition temperature: 240 °C
Upper/lower flammability or explosive limits: 3.3 – 26.2 Vol-%
Vapour pressure (at 20°C): 4000 hPa
Density (at 20°C): 1 g/cm³

Drying time (at 20°C, 55% relative air humidity):
Dust-dry: after approx. 30 minutes
Dry to touch: after approx. 40 minutes
Recoatable: after approx. 2 hours
Temperature resistance: approx. 90°C
VOC content: 424.5 g/l (29.80%)
Storage: 24 months at 8°C to 30°C, 30-75% relative air humidity

  • USE:
    - for dirty substrates such as walls or ceilings
    - applicable for spots caused by grease, nicotine, soot or water as well as stains of insects, coffee, bitumen, tar or crayons
    - can be used on surfaces such as polystyrene, wallpaper, old wall paint or plaster
  • APPLICATION:
    - Shake the can for 2 minutes before use
    - Surface must be dry and clean
    - Initially test spray on an inconspicuous place
    - Apply from a distance of approx. 25 cm several thin cross-coats
    - To increase insulating effect, let the surface dry