Fast Fix Primer
FAST FIX PRIMER is a solvent based primer for the treatment of nonpopular surfaces such as polyethylene, polypropylene or PTFE.
With FAST FIX PRIMER difficult surfaces can be bonded with any FAST FIX glue.
Region:
TECH-MASTERS Group
Changing region
TECH-MASTERS Group
Changing region
-
TECH-MASTERS Austria
-
TECH-MASTERS Germany
-
TECH-MASTERS Croatia
-
TECH-MASTERS Czech
-
TECH-MASTERS Poland
-
TECH-MASTERS Slovakia
-
TECH-MASTERS Hungary
-
TECH-MASTERS Romania
-
TECH-MASTERS Slovenia
-
TECH-MASTERS Italia
-
TECH-MASTERS Group
- For the treatment of nonpopular surface (e.g. polyethylene, polypropylene, PTFE)
- Usable on a wide range of difficult surfaces
- Excellent strength
| Article nr | Name | Content |
|---|---|---|
| T501014 | Fast Fix Primer 50ml | 50ml |
| T501015 | Fast Fix Primer Liquid 10ml | 10ml |
» To the shop
Physical state: Aerosol
Colour: transparent
Odour: characteristic
Density (at 20°C): 0,7 g/cm³
Viscosity: < 20 mPas
Initial boiling point and boiling range: < 0 °C
Flash point: < 0 °C
Shelf life: 12 months at room temperature
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use.
Buildup of explosive mixtures possible without sufficient ventilation.
- 1. Clean the surface thoroughly.
- 2. Fast Fix Primer should be applied to a clean, lint-free cloth / paper / sponge and the surface should be wetted with it.
- 3. ATTENTION: Before the adhesive is applied, the solvent must be completely evaporated!
- 4. ATTENTION: There should not be more than an hour between applying the primer and applying the adhesive.
- 5. ATTENTION: If only one part to be joined is made of non-polar plastic, only this must be treated with primer. In this case, the adhesive should be applied to the untreated surface.
- 6. Load the bond only after the final strength has been reached.
Fast Fix Primer
FAST FIX PRIMER is a solvent based primer for the treatment of nonpopular surfaces such as polyethylene, polypropylene or PTFE.
With FAST FIX PRIMER difficult surfaces can be bonded with any FAST FIX glue.
- For the treatment of nonpopular surface (e.g. polyethylene, polypropylene, PTFE)
- Usable on a wide range of difficult surfaces
- Excellent strength
| Article nr | Name | Content |
|---|---|---|
| T501014 | Fast Fix Primer 50ml | 50ml |
| T501015 | Fast Fix Primer Liquid 10ml | 10ml |
» To the shop
Physical state: Aerosol
Colour: transparent
Odour: characteristic
Density (at 20°C): 0,7 g/cm³
Viscosity: < 20 mPas
Initial boiling point and boiling range: < 0 °C
Flash point: < 0 °C
Shelf life: 12 months at room temperature
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use.
Buildup of explosive mixtures possible without sufficient ventilation.
- 1. Clean the surface thoroughly.
- 2. Fast Fix Primer should be applied to a clean, lint-free cloth / paper / sponge and the surface should be wetted with it.
- 3. ATTENTION: Before the adhesive is applied, the solvent must be completely evaporated!
- 4. ATTENTION: There should not be more than an hour between applying the primer and applying the adhesive.
- 5. ATTENTION: If only one part to be joined is made of non-polar plastic, only this must be treated with primer. In this case, the adhesive should be applied to the untreated surface.
- 6. Load the bond only after the final strength has been reached.