Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Fast Clean

FAST CLEAN is a professional, hydrocarbon based highly effective and fast cleaner and degreaser. FAST CLEAN is ideal to free parts of greasy, resinous and silicon residues during servicing and repairing. FAST CLEAN removes grease, oil, tar, wax, brake dust, and acitvates parts before glueing and painting. FAST CLEAN is ideal for residue-free cleaning. Because of the CO² propellant FAST CLEAN contains 95% active compound, this is 30% more than competitive products. 
 

  • Cleans and degreases in seconds
  • Fast drying and leaves no residue
  • CO² propellant - 95% active compound
  • High pressure spray - blasts dirt and dust away
  • Does not contain any chlorinated and halogenated hydrocarbons
  • Safe in use, does not attack plastic 
  • Optimal oil and grease cleaning
  • Recommended as surface cleaner when using adhesives, lacquers, tapes,...
  • Because of special valve no flame kickback possible
  • 100% acetone free
  • 360° nozzle for easy application also in hard to reach places
Article nr Name Content
T497001 Fast Clean 600ml 600ml
T497005 Fast Clean 5l 5l

» To the shop
  • Technical data
  • Application and usage
  • Downloads

AEROSOL
Colour: colourless
Odour: solvent like
Initial boiling point and boiling range: 88°C
Flash point: -12°C
Density (20°C): 0,714 g/cm³, DIN 51757
Viscosity, kinematic (40°C): < 7 mm²/s
Lower flammability or explosion limits explosion limits: 0,6 Vol-%
Upper flammability or explosion limits explosion limits: 7,2 Vol-%
Water solubility: practically insoluble

LIQUID
Colour: colourless
Odour: characteristic
Melting point: < -30 °C
Initial boiling point and boiling range: 89 – 107 °C
Flash point: -9 °C
Vapour pressure: 6 kPa
Upper/lower flammability or explosive limits: 0.6 – 7 Vol-%
Density: 0.685 – 0.73 g/cm³
Partition coefficient: n-octanol/water: 4

  • APPLICATION: 
  • Removes greasy or resinous residues during servicing, repair and prior to assembling
  • Removes and acitvates parts before glueing and pianting
  • Removes oils and residues, synthetic oils, grease, tar, wax, break dust, glue, silicon residues
  • Ideal for residue-free cleaning of metal parts in Automotive and Industry: like aluminium, all kind of electronic breaks and ABS systems, engine parts, chains, gears, clutch parts, tools, machines
  • USE:
  • Check plastic and paint compatibility first. Spray cleaner onto the parts. Leave to work for a short period. 

Fast Clean

FAST CLEAN is a professional, hydrocarbon based highly effective and fast cleaner and degreaser. FAST CLEAN is ideal to free parts of greasy, resinous and silicon residues during servicing and repairing. FAST CLEAN removes grease, oil, tar, wax, brake dust, and acitvates parts before glueing and painting. FAST CLEAN is ideal for residue-free cleaning. Because of the CO² propellant FAST CLEAN contains 95% active compound, this is 30% more than competitive products. 
 

  • Cleans and degreases in seconds
  • Fast drying and leaves no residue
  • CO² propellant - 95% active compound
  • High pressure spray - blasts dirt and dust away
  • Does not contain any chlorinated and halogenated hydrocarbons
  • Safe in use, does not attack plastic 
  • Optimal oil and grease cleaning
  • Recommended as surface cleaner when using adhesives, lacquers, tapes,...
  • Because of special valve no flame kickback possible
  • 100% acetone free
  • 360° nozzle for easy application also in hard to reach places
Article nr Name Content
T497001 Fast Clean 600ml 600ml
T497005 Fast Clean 5l 5l

» To the shop
  • Technical data
  • Application and usage
  • Downloads

AEROSOL
Colour: colourless
Odour: solvent like
Initial boiling point and boiling range: 88°C
Flash point: -12°C
Density (20°C): 0,714 g/cm³, DIN 51757
Viscosity, kinematic (40°C): < 7 mm²/s
Lower flammability or explosion limits explosion limits: 0,6 Vol-%
Upper flammability or explosion limits explosion limits: 7,2 Vol-%
Water solubility: practically insoluble

LIQUID
Colour: colourless
Odour: characteristic
Melting point: < -30 °C
Initial boiling point and boiling range: 89 – 107 °C
Flash point: -9 °C
Vapour pressure: 6 kPa
Upper/lower flammability or explosive limits: 0.6 – 7 Vol-%
Density: 0.685 – 0.73 g/cm³
Partition coefficient: n-octanol/water: 4

  • APPLICATION: 
  • Removes greasy or resinous residues during servicing, repair and prior to assembling
  • Removes and acitvates parts before glueing and pianting
  • Removes oils and residues, synthetic oils, grease, tar, wax, break dust, glue, silicon residues
  • Ideal for residue-free cleaning of metal parts in Automotive and Industry: like aluminium, all kind of electronic breaks and ABS systems, engine parts, chains, gears, clutch parts, tools, machines
  • USE:
  • Check plastic and paint compatibility first. Spray cleaner onto the parts. Leave to work for a short period.