Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Easy Seal

EASY SEAL is a special tool for the processing of permanently elastic materials such as silicones.
EASY SEAL comes in 3 sizes with different edges and curves depending on the intended use. EASY SEAL is made of elastic, abrasion and acid-proof plastic which makes it easy to use and clean.

  • Different edges and curves for various applications
  • Made of elastic, abrasion and acid-proof plastic
  • Easy to use and clean
  • Comes in 3 different sizes:
    5mm - 8mm -  round

» To the shop
  • Technical data
  • Application and usage
  • Downloads

#-#-#Sizes: 5mm - 8mm - round
Material: elastic, abrasion and acid-proof plastic

  • USE:
  • Joints must be dry, clean and free from dust. Then fill the joints with a little excess with silicone.
  • Dampen the joint with water. Use a brush or sprayer for this purpose.
  • Keep EASY SEAL at a constant angle to the wall and trim off the surplus silicone.
  • Keep EASY SEAL moist while in use. 
  • Scrape the surplus silicone of into a container with water.

Easy Seal

EASY SEAL is a special tool for the processing of permanently elastic materials such as silicones.
EASY SEAL comes in 3 sizes with different edges and curves depending on the intended use. EASY SEAL is made of elastic, abrasion and acid-proof plastic which makes it easy to use and clean.

  • Different edges and curves for various applications
  • Made of elastic, abrasion and acid-proof plastic
  • Easy to use and clean
  • Comes in 3 different sizes:
    5mm - 8mm -  round

» To the shop
  • Technical data
  • Application and usage
  • Downloads

#-#-#Sizes: 5mm - 8mm - round
Material: elastic, abrasion and acid-proof plastic

  • USE:
  • Joints must be dry, clean and free from dust. Then fill the joints with a little excess with silicone.
  • Dampen the joint with water. Use a brush or sprayer for this purpose.
  • Keep EASY SEAL at a constant angle to the wall and trim off the surplus silicone.
  • Keep EASY SEAL moist while in use. 
  • Scrape the surplus silicone of into a container with water.