Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Drill & Cut

DRILL & CUT is a specifically developed cooling lubricant for all kinds of metalworking such as drilling, tapping, cutting, milling, lathing etc. Controlled lubrication and immediate cooling increase the lifetime of tools and improve the processing result. DRILL & CUT can be used for processing alloy and non-alloy steel, stainless steel as well as softer metals such as aluminum, brass or copper.
DRILL & CUT is economical in use and does not drip, even when applied to uneven surfaces and therefore no loss due to dripping or evaporation. 

  • Suitable for all kinds of metals such steel, stainless steel, brass, aluminum etc.
  • Extends life time of drills, taps, milling cutters, lathe tools, cutting blades and bands. Guarantees optimal cutting quality and performance.
  • Optimized and effective heat removal from work piece and therefore reduces mechanical wear of tool
  • Economical in use and free of acids and resins
  • Jet spray nozzle can also reach areas difficult to access with apparent ease
  • Protects effectively against oxidation and corrosion
Article nr Name Content
T241001 Drill & Cut 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Form: aerosol
Odour: characteristic
Initial boiling point: -44,5°C
Flash point: -97°C
Auto-ignition temperature: 365°C

Lower explosion limit: 1,5 Vol%
Upper explosion limit: 10,9 Vol%
Vapour pressure (at 20°C): 3800 hPa
Density (at 20°C): 0,807 g/cm³
Application temperature: 10°C - 35°C

  • Use DRILL & CUT at room temperature and shake well before use.
  • Drilling, tapping, milling and lathing: Spray directly at point being mechanically processed
  • For sawing: Spray on material along the cutting edge
  • To reach the best possible result, repeat this procedure if necessary. 

Drill & Cut

DRILL & CUT is a specifically developed cooling lubricant for all kinds of metalworking such as drilling, tapping, cutting, milling, lathing etc. Controlled lubrication and immediate cooling increase the lifetime of tools and improve the processing result. DRILL & CUT can be used for processing alloy and non-alloy steel, stainless steel as well as softer metals such as aluminum, brass or copper.
DRILL & CUT is economical in use and does not drip, even when applied to uneven surfaces and therefore no loss due to dripping or evaporation. 

  • Suitable for all kinds of metals such steel, stainless steel, brass, aluminum etc.
  • Extends life time of drills, taps, milling cutters, lathe tools, cutting blades and bands. Guarantees optimal cutting quality and performance.
  • Optimized and effective heat removal from work piece and therefore reduces mechanical wear of tool
  • Economical in use and free of acids and resins
  • Jet spray nozzle can also reach areas difficult to access with apparent ease
  • Protects effectively against oxidation and corrosion
Article nr Name Content
T241001 Drill & Cut 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Form: aerosol
Odour: characteristic
Initial boiling point: -44,5°C
Flash point: -97°C
Auto-ignition temperature: 365°C

Lower explosion limit: 1,5 Vol%
Upper explosion limit: 10,9 Vol%
Vapour pressure (at 20°C): 3800 hPa
Density (at 20°C): 0,807 g/cm³
Application temperature: 10°C - 35°C

  • Use DRILL & CUT at room temperature and shake well before use.
  • Drilling, tapping, milling and lathing: Spray directly at point being mechanically processed
  • For sawing: Spray on material along the cutting edge
  • To reach the best possible result, repeat this procedure if necessary.