Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Copper Spray

COPPER SPRAY is a long-lasting high-temperature lubricant and anti-seize compound. COPPER SPRAY builds an effective gliding and separating film on insert tools, wear bushings, screw, plug and bayonet connections of all kinds, which protects the functional surfaces from corrosion and fretting corrosion.
COPPER SPRAY protects metal components from seizure, rust, water, heat and acid. COPPER SPRAY conducts electrical current and prevents squeaking. COPPER SPRAY promotes future dismantling of threaded fastenings. COPPER SPRAY is easy to use and comes with an additional tube to access hard to reach places perfectly. 
 

  • Extremly high temperature resistance, up to +1100°C
  • Conducts electrical current.
  • Prevents seizure and squeaking.
  • Protects metals against seizure, corrosion, heat and water.
  • Promotes future dismantling of threaded fastenings.
Article nr Name Content
T114002 Copper Spray 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Base: Mixture of greases, mineral oils, copper particles, corrosion inhibitors
Propellant: Propane – butane
Physical state: Aerosol
Colour: According to product designation
Odour: characteristic
Melting point: -60 °C
Initial boiling point and boiling range: -44.5 °C

Flash point: -97 °C
Auto-ignition temperature: > 200 °C
Upper/lower flammability or explosive limits: 0.8 – 10.9 Vol-%
Vapour pressure: 3,800 hPa
Pressure (20°C): 4 Bar 
Density: ≈ 0.714 g/cm³
Spray pattern: Jet, non dripping grease
Temperature range: -40°C - + 1100°C

  • Use COPPER SPRAY at room temperature, shake well before and apply on the place to be protected or lubricated.
  • After the solvents of COPPER SPRAY are evaporated (approximately 5 minutes), a thick and protective layer has been formed.
  • Avoid excess application of COPPER SPRAY and remove unneeded lubricant with a cloth.
  • When COPPER SPRAY is used on screw threads, make sure that it reaches the bottom, to create the best sealing effect.
  • APPLICATIONS: wheel nuts and bolts, exhaust brackets, flanges and on external hinges, screws, nuts, bolts...
  • IMPORTANT: COPPER SPRAY IS NOT SUITABLE FOR ABS BRAKE SYSTEMS!

Copper Spray

COPPER SPRAY is a long-lasting high-temperature lubricant and anti-seize compound. COPPER SPRAY builds an effective gliding and separating film on insert tools, wear bushings, screw, plug and bayonet connections of all kinds, which protects the functional surfaces from corrosion and fretting corrosion.
COPPER SPRAY protects metal components from seizure, rust, water, heat and acid. COPPER SPRAY conducts electrical current and prevents squeaking. COPPER SPRAY promotes future dismantling of threaded fastenings. COPPER SPRAY is easy to use and comes with an additional tube to access hard to reach places perfectly. 
 

  • Extremly high temperature resistance, up to +1100°C
  • Conducts electrical current.
  • Prevents seizure and squeaking.
  • Protects metals against seizure, corrosion, heat and water.
  • Promotes future dismantling of threaded fastenings.
Article nr Name Content
T114002 Copper Spray 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Base: Mixture of greases, mineral oils, copper particles, corrosion inhibitors
Propellant: Propane – butane
Physical state: Aerosol
Colour: According to product designation
Odour: characteristic
Melting point: -60 °C
Initial boiling point and boiling range: -44.5 °C

Flash point: -97 °C
Auto-ignition temperature: > 200 °C
Upper/lower flammability or explosive limits: 0.8 – 10.9 Vol-%
Vapour pressure: 3,800 hPa
Pressure (20°C): 4 Bar 
Density: ≈ 0.714 g/cm³
Spray pattern: Jet, non dripping grease
Temperature range: -40°C - + 1100°C

  • Use COPPER SPRAY at room temperature, shake well before and apply on the place to be protected or lubricated.
  • After the solvents of COPPER SPRAY are evaporated (approximately 5 minutes), a thick and protective layer has been formed.
  • Avoid excess application of COPPER SPRAY and remove unneeded lubricant with a cloth.
  • When COPPER SPRAY is used on screw threads, make sure that it reaches the bottom, to create the best sealing effect.
  • APPLICATIONS: wheel nuts and bolts, exhaust brackets, flanges and on external hinges, screws, nuts, bolts...
  • IMPORTANT: COPPER SPRAY IS NOT SUITABLE FOR ABS BRAKE SYSTEMS!