Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

CA Buster HCI

CA Buster HCI is a safe and effective replacement for dangerous raw and muriatic acid products.
It penetrates without heavy agitation to break up and remove lime deposits, scale, rust, algae, stains, mineral sediments and scum.

  • Works quickly, so personnel can avoid lengthy chipping & scraping.
  • Very economical in use - can be diluted with water for most applications.
  • Safe to use on most metals, such as copper, brass, aluminum, and several kinds of plastics. Contains a powerful corrosion inhibitor.
  • Will not burn the skin even if spilled at full strength. Does not fume like muriatic products.
  • Does not change its characteristics for a long time even under temperature variations.
Article nr Name Content
T102005 CA Buster HCl 5l 5l
T102010 CA Buster HCl 10l 10l
T102025 CA Buster HCl 25l 25l
T102200 CA Buster HCl 200l 200l

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Liquid
Colour: green
Odour: Perfumes, fragrances
pH-value: ≈ 0 (20 °C)
Melting point / melting range: 0 °C
Freezing point: 0 °C

Initial boiling point and boiling range: ≈ 100 °C
Density (20°C): 1.05 g/cm³
Solubility in / miscibility with water (20°C): completely miscible 
Viscosity (25°C): < 10 mPa*s
Safety measures: Consult the Safety Data Sheet

  • CA Buster HCI can be applied by brush, dip or spray. If sprayers are used, they must be made of safe plastic or polyethylene. When spraying use a coarse spray pattern and avoid inhalation of mist. Let soak for several minutes for chemiacal fizzing action to take place, then rinse thoroughly. Repeat as needed.
  • NOTE: There are some types of chrome plating, stainless steel, and decorative aluminum that can discolor. Test small area first.

CA Buster HCI

CA Buster HCI is a safe and effective replacement for dangerous raw and muriatic acid products.
It penetrates without heavy agitation to break up and remove lime deposits, scale, rust, algae, stains, mineral sediments and scum.

  • Works quickly, so personnel can avoid lengthy chipping & scraping.
  • Very economical in use - can be diluted with water for most applications.
  • Safe to use on most metals, such as copper, brass, aluminum, and several kinds of plastics. Contains a powerful corrosion inhibitor.
  • Will not burn the skin even if spilled at full strength. Does not fume like muriatic products.
  • Does not change its characteristics for a long time even under temperature variations.
Article nr Name Content
T102005 CA Buster HCl 5l 5l
T102010 CA Buster HCl 10l 10l
T102025 CA Buster HCl 25l 25l
T102200 CA Buster HCl 200l 200l

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Liquid
Colour: green
Odour: Perfumes, fragrances
pH-value: ≈ 0 (20 °C)
Melting point / melting range: 0 °C
Freezing point: 0 °C

Initial boiling point and boiling range: ≈ 100 °C
Density (20°C): 1.05 g/cm³
Solubility in / miscibility with water (20°C): completely miscible 
Viscosity (25°C): < 10 mPa*s
Safety measures: Consult the Safety Data Sheet

  • CA Buster HCI can be applied by brush, dip or spray. If sprayers are used, they must be made of safe plastic or polyethylene. When spraying use a coarse spray pattern and avoid inhalation of mist. Let soak for several minutes for chemiacal fizzing action to take place, then rinse thoroughly. Repeat as needed.
  • NOTE: There are some types of chrome plating, stainless steel, and decorative aluminum that can discolor. Test small area first.