Menu
Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group
+43 7242 9396 1650
« ADHESIVES AND SEALANTS

Bond & Fix

BOND & FIX is a styrene free methacrylate resin for high performance fixing applications of threaded rod in hollow or concrete blocks and rebar into
concrete and masonry.
BOND & FIX is a two compenents system (resin & hardener). The chemical reaction between the two
components makes the mortar hardening. The resin changes the colour from blue to grey when it is cured.
BOND & FIX is easy to dispense and is fast in curing.
BOND & FIX is specially formulated for structural fixings and very technical sites: metallic racking or work into reinforced concrete.

  • Comfort security due to colour change of resin during curing time
  • Easy to dispense and fast curing
  • ETA certified for rods, rebar, concrete and masonry
  • Styrene free
  • Low smell
  • Reclosable
  • Non-flammable resin
  • High performance: medium and heavy loads
  • Works in damp conditions
Article nr Name Content
T595003 Bond & Fix 300ml 300ml
Y595013 Brush 17mm 1pc.
Y595014 Brush 30mm 1pc.
Y595015 Blowing Pump 1pc.
Y595016 Sleeves M12x50 150 pcs.
Y595020 Brush 12mm 1pc.

» To the shop
  • Technical data
  • Application and usage
  • Downloads
PART A
Physical state: paste
Ratio: 10:1
Color: beige
Odour: characteristic
Vapour density (at 20°C): 0,6
Relative density: 1,68 - 1,69
Water solubility: pa
Flash Point Interval : PE > 100°C.
Water solubility: practically insoluble
Dynamic viscosity: > 100.000 cP

PART B
Physical state: paste
Ratio: 10:1
Color: grey
Odour: characteristic
Melting point: 0°C
Relative density: 1,45
Water solubility: practically insoluble

Storage: up to 18 months (5°C - 25°C). 
For detailed information please see the Technical Data table attached to the product datasheet.#-#-#
 
Parametres N/mm2 Test Method
Compressive Strength 43,5 EN ISO 604 / ASTM 695
Flexual Strength 15,9 EN ISO 178 / ASTM 790
Flexual Modulus 2803 EN ISO 178 / ASTM 790
Tensile Strength 9,3 EN ISO 527 / ASTM 638
E Modulus 4874,5 EN ISO 527 / ASTM 638
VOC Content A+ Rating  
  • INSTALLATION - CONCRETE:
  • 1: Drill hole to specified diameter and depth.
  • 2: Clean hole by brushing and blowing alternately:
  • - Concrete Option 8: 2x blow (hand pump/6bar), 4x brush, 2x blow (hand pump/6bar) - compressed air (6bar) for drilled holes hₑf ≥ 10d or > Ø22mm.
  • - Rebar : 2x blow (6bar), 2x brush, 2x blow (6bar).
  • - Masonry, solid and perforated : 2x blow (hand pump), 2x brush, 2x blow (hand pump).
  • 3: Dispenser adhesive until uniform colour appears. Inject resin using a dispensing tool. Fill hole one-half to two-thirds full, starting from bottom of hole, withdraw the nozzle after each trigger to prevent air pockets.
  • 4: Insert clean, oil-free threaded rod/rebar, turning slowly until anchor/threaded rod reaches bottom of hole.
  • 5: Threaded rod/rebar can be adjusted and/or more resin added before working time elapses.
    •   #-#-#                                                                                       
  • INSTALLATION - MASONRY:
  • 1: Drill hole to specified diameter and depth.
  • 2: Clean hole by brushing and blowing alternately:
  • - Concrete Option 8: 2x blow (hand pump/6bar), 4x brush, 2x blow (hand pump/6bar) - compressed air (6bar) for drilled holes hₑf ≥ 10d or > Ø22mm.
  • - Rebar : 2x blow (6bar), 2x brush, 2x blow (6bar).
  • - Masonry, solid and perforated : 2x blow (hand pump), 2x brush, 2x blow (hand pump).
  • 3: Insert Tech Masters sleeve.
  • 4: Dispenser adhesive until uniform colour appears. Fill sleeve by withdrawing nozzle one graduation after each trigger pull of dispensing tool.
  • 5: Insert clean, oil-free threaded rod, until it reaches bottom of sleeve.
  • 6: Rod can be adjusted and/or more resin can be added before working time elapses.
  • APPLICATION: Rebar connections, Threaded rod, Fixing of heavy metal structures, Balconnies, Facades, Racking
pdf Product Information
techmasters_en_bof_PDS.pdftechmasters_en_bof_PDS.pdf (502.6 KB)
pdf SPM_Bond&Fix
techmasters_en_bof_Confirmation_SPM free_INFO.pdftechmasters_en_...M free_INFO.pdf (271.6 KB)
pdf MSDS T595003 Bond & Fix (Comp. B) 300ml V3
MSDS_T595003_Bond_Fix_Comp_B_300ml_T595003_V3_en_AT.pdfMSDS_T595003_Bo...03_V3_en_AT.pdf (367.0 KB)
pdf MSDS T595003 Bond & Fix (Comp. A) 300ml V4
MSDS_T595003_Bond_Fix_Comp_A_300ml_T595003_V4_en_AT.pdfMSDS_T595003_Bo...03_V4_en_AT.pdf (432.8 KB)

Bond & Fix

BOND & FIX is a styrene free methacrylate resin for high performance fixing applications of threaded rod in hollow or concrete blocks and rebar into
concrete and masonry.
BOND & FIX is a two compenents system (resin & hardener). The chemical reaction between the two
components makes the mortar hardening. The resin changes the colour from blue to grey when it is cured.
BOND & FIX is easy to dispense and is fast in curing.
BOND & FIX is specially formulated for structural fixings and very technical sites: metallic racking or work into reinforced concrete.

  • Comfort security due to colour change of resin during curing time
  • Easy to dispense and fast curing
  • ETA certified for rods, rebar, concrete and masonry
  • Styrene free
  • Low smell
  • Reclosable
  • Non-flammable resin
  • High performance: medium and heavy loads
  • Works in damp conditions
Article nr Name Content
T595003 Bond & Fix 300ml 300ml
Y595013 Brush 17mm 1pc.
Y595014 Brush 30mm 1pc.
Y595015 Blowing Pump 1pc.
Y595016 Sleeves M12x50 150 pcs.
Y595020 Brush 12mm 1pc.

» To the shop
  • Technical data
  • Application and usage
  • Downloads
PART A
Physical state: paste
Ratio: 10:1
Color: beige
Odour: characteristic
Vapour density (at 20°C): 0,6
Relative density: 1,68 - 1,69
Water solubility: pa
Flash Point Interval : PE > 100°C.
Water solubility: practically insoluble
Dynamic viscosity: > 100.000 cP

PART B
Physical state: paste
Ratio: 10:1
Color: grey
Odour: characteristic
Melting point: 0°C
Relative density: 1,45
Water solubility: practically insoluble

Storage: up to 18 months (5°C - 25°C). 
For detailed information please see the Technical Data table attached to the product datasheet.#-#-#
 
Parametres N/mm2 Test Method
Compressive Strength 43,5 EN ISO 604 / ASTM 695
Flexual Strength 15,9 EN ISO 178 / ASTM 790
Flexual Modulus 2803 EN ISO 178 / ASTM 790
Tensile Strength 9,3 EN ISO 527 / ASTM 638
E Modulus 4874,5 EN ISO 527 / ASTM 638
VOC Content A+ Rating  
  • INSTALLATION - CONCRETE:
  • 1: Drill hole to specified diameter and depth.
  • 2: Clean hole by brushing and blowing alternately:
  • - Concrete Option 8: 2x blow (hand pump/6bar), 4x brush, 2x blow (hand pump/6bar) - compressed air (6bar) for drilled holes hₑf ≥ 10d or > Ø22mm.
  • - Rebar : 2x blow (6bar), 2x brush, 2x blow (6bar).
  • - Masonry, solid and perforated : 2x blow (hand pump), 2x brush, 2x blow (hand pump).
  • 3: Dispenser adhesive until uniform colour appears. Inject resin using a dispensing tool. Fill hole one-half to two-thirds full, starting from bottom of hole, withdraw the nozzle after each trigger to prevent air pockets.
  • 4: Insert clean, oil-free threaded rod/rebar, turning slowly until anchor/threaded rod reaches bottom of hole.
  • 5: Threaded rod/rebar can be adjusted and/or more resin added before working time elapses.
    •   #-#-#                                                                                       
  • INSTALLATION - MASONRY:
  • 1: Drill hole to specified diameter and depth.
  • 2: Clean hole by brushing and blowing alternately:
  • - Concrete Option 8: 2x blow (hand pump/6bar), 4x brush, 2x blow (hand pump/6bar) - compressed air (6bar) for drilled holes hₑf ≥ 10d or > Ø22mm.
  • - Rebar : 2x blow (6bar), 2x brush, 2x blow (6bar).
  • - Masonry, solid and perforated : 2x blow (hand pump), 2x brush, 2x blow (hand pump).
  • 3: Insert Tech Masters sleeve.
  • 4: Dispenser adhesive until uniform colour appears. Fill sleeve by withdrawing nozzle one graduation after each trigger pull of dispensing tool.
  • 5: Insert clean, oil-free threaded rod, until it reaches bottom of sleeve.
  • 6: Rod can be adjusted and/or more resin can be added before working time elapses.
  • APPLICATION: Rebar connections, Threaded rod, Fixing of heavy metal structures, Balconnies, Facades, Racking
pdf Product Information
techmasters_en_bof_PDS.pdftechmasters_en_bof_PDS.pdf (502.6 KB)
pdf SPM_Bond&Fix
techmasters_en_bof_Confirmation_SPM free_INFO.pdftechmasters_en_...M free_INFO.pdf (271.6 KB)
pdf MSDS T595003 Bond & Fix (Comp. B) 300ml V3
MSDS_T595003_Bond_Fix_Comp_B_300ml_T595003_V3_en_AT.pdfMSDS_T595003_Bo...03_V3_en_AT.pdf (367.0 KB)
pdf MSDS T595003 Bond & Fix (Comp. A) 300ml V4
MSDS_T595003_Bond_Fix_Comp_A_300ml_T595003_V4_en_AT.pdfMSDS_T595003_Bo...03_V4_en_AT.pdf (432.8 KB)
1. Choose location
TECH-MASTERS Group
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group
2. Cookies

We use our own and third-party cookies to personalize content and advertisements, to be able to offer functions for social media and to analyze access to our website. The cookies are described in more detail under "Cookie Settings" and can be activated or deactivated. By clicking on "Allow all cookies" you agree to their use. You can subsequently change your cookie settings on the "Privacy Policy" page. Additional Information:  Privacy policy incl. cookie settings | General terms and conditions

Accept cookies

Cookie Settings

×
  • What are cookies?
  • Required Cookies
  • Performance Cookies
  • Marketing Cookies

What are cookies?

Cookies are text files that are stored by a browser on the end device to store certain information. With this information, our website recognizes that you have already visited it. We use this to prepare the information accordingly. Your personal data will not be saved.

Required Cookies

These cookies control functions without which our website cannot be used to its full extent. These cookies are only used by us (our own cookies). As a result, this information is only used and processed by our website. For example, you don't have to log in again every time you log in.

Performance Cookies

“Google Analytics” and “Google Tag Manager” are used to collect information on how our website is used. These cookies help us, for example, to determine whether and which sub-pages of our website are visited and what content the users are interested in. We primarily record the number of visits and their duration. Note on data processing in the USA: According to the case law of the European Court of Justice (judgement of July 16, 2020, case ref.: C-311/18 (“Schrems II”)) no adequate level of data protection exists in the USA. In addition, government surveillance measures in the USA may result where no adequate legal protection can be sought against these measures. In particular, US security and secret services may have access to your data without you being informed and without you being able to take legal action against it. The data processing in the USA in connection with the data processed by Tech-Masters Trading GmbH is based on your consent in the sense of Art. 49 para. 1 lit a) in conjunction with Art. 6 para. 1 lit a) GDPR. You can revoke your consent at any time non-retroactively. Understanding the above information on data protection in the USA, I also consent to the processing of personal data in the USA if and to the extent that I give my consent to the use of cookies via configuration of the cookie settings. I may revoke my consent at any time non-retroactively.

Marketing Cookies

We show "Youtube" videos for some products. This marketing cookie comes from Google and collects information about the websites visited by the user in order to create targeted advertising for the visitor. In this context, we do not process any personal data without your consent in accordance with Article 6 (1) (a) GDPR.