Region:

no location selected Changing region

TECH-MASTERS Austria
TECH-MASTERS Germany
TECH-MASTERS Croatia
TECH-MASTERS Czech
TECH-MASTERS Poland
TECH-MASTERS Slovakia
TECH-MASTERS Hungary
TECH-MASTERS Romania
TECH-MASTERS Slovenia
TECH-MASTERS Italia
TECH-MASTERS Group

Aqua Clean Blue

AQUA CLEAN BLUE is an extremely economical, non-corrosive degreaser that is suitable for most water-resistant surfaces, where it effectively removes dried oil films, cutting and machining fluids, etc.. AQUA CLEAN BLUE impresses with its high effectiveness and can be used reliably in all areas of food processing. AQUA CLEAN BLUE is particularly suitable for surface preparation before applying paints and varnishes, and effectively removes insects from windshields and car bodies. It acts as an emulsifier on greasy and oily layers. The dirt loses its adhesion to the surface and the resulting emulsion can be removed by wiping or rinsing. AQUA CLEAN BLUE can be diluted with water in a ratio of 1:20 for less demanding applications. It can be used near open flames, sparks, and heat sources.

Economical, non-corrosive degreaser - contains a powerful corrosion inhibitor to reduce the risk of corrosion on iron and steel
For all water-resistant surfaces
Particularly reliable in all areas of food processing
Effectively degreases dry oil layers
Particularly suitable for use prior to painting and coating work
Biodegradable
HACCP conform
HALAL certification
NSF certification Cat. A1 NF167770
In accordance with NSF regulations, hands and cleaned surfaces must be rinsed with drinking water

Article nr	Name	Content
T121005	Aqua Clean Blue 5l	5l
T121010	Aqua Clean Blue 10l	10l
T121025	Aqua Clean Blue 25l	25l
T199001	Defoamer 1l	1l
T875003	Spray Master Alkaline 1,5l	1pc.
Y899050	Cleaning Cloth small 2-ply	1 roll
Y899201	Wall Holder	1pc.

Technical data
Application and usage
Downloads

Appearance:liquid
Colour: light blue
Odour: characteristic
pH-value (at 20°C): 13,0 - 14,0
Melting point: ≈ 0°C
Freezing point: ≈ 0°C

Initial boiling point: ≈ 100°C
Flash point: 43°C
Density (at 20°C): 1,03 g/cm³
Water solubility: completely miscible
Dynamic viscosity (at 25°C): < 10 mPas

AQUA CLEAN BLUE is applied to the surfaces to be cleaned by spraying, spreading, or using steam or high-pressure cleaning equipment. When heated to 80 °C, its effectiveness increases by up to 50%. Therefore, the water content in the working solution can be increased. Depending on the type of soiling, leave it to work for 30 to 60 seconds. Then rinse the surface with clean water and wipe dry.

DILUTION TABLE | AQUA CLEAN BLUE:WATER
Machine tools | 1:1 - 1:2
Food machines | 1:2 - 1:5
Floors | 1:10
Brushing machines | 1:20
Tarpaulins | 1:20
Packaging machines | 1:20
Steam cleaning | 1:20
Metallurgical material | 1:1 - 1:2
Circular saws | 1:2
Cleaning of not very oily surfaces | 1:20

pdf Product Information
techmasters_en_acb_PDS.pdftechmasters_en_acb_PDS.pdf (8.3 MB)

pdf Confirmation_HACCP conformity
techmasters_en_acb_Confirmation_HACCP conformity_Aqua Clean Blue_INFO.pdftechmasters_en_...n Blue_INFO.pdf (1.5 MB)

pdf Certificate of Registration_NSF
techmasters_en_acb_NSF Aqua Clean Blue_INFO.pdftechmasters_en_...n Blue_INFO.pdf (607.3 KB)

pdf Certification_Halal
techmasters_en_acb_Halal_Zertifikat_C-24-60465-01-01_KANDO_INFO.pdftechmasters_en_..._KANDO_INFO.pdf (296.3 KB)

pdf MSDS T121010 Aqua Clean Blue 10l V4
MSDS_T121010_Aqua_Clean_Blue_10l_T121010_V4_en_AT.pdfMSDS_T121010_Aq...10_V4_en_AT.pdf (388.6 KB)

pdf MSDS T121005 Aqua Clean Blue 5l V4
MSDS_T121005_Aqua_Clean_Blue_5l_T121005_V4_en_AT.pdfMSDS_T121005_Aq...05_V4_en_AT.pdf (388.5 KB)

pdf MSDS T121025 Aqua Clean Blue 25l V4
MSDS_T121025_Aqua_Clean_Blue_25l_T121025_V4_en_AT.pdfMSDS_T121025_Aq...25_V4_en_AT.pdf (388.6 KB)

Aqua Clean Blue

Economical, non-corrosive degreaser - contains a powerful corrosion inhibitor to reduce the risk of corrosion on iron and steel
For all water-resistant surfaces
Particularly reliable in all areas of food processing
Effectively degreases dry oil layers
Particularly suitable for use prior to painting and coating work
Biodegradable
HACCP conform
HALAL certification
NSF certification Cat. A1 NF167770
In accordance with NSF regulations, hands and cleaned surfaces must be rinsed with drinking water

Article nr	Name	Content
T121005	Aqua Clean Blue 5l	5l
T121010	Aqua Clean Blue 10l	10l
T121025	Aqua Clean Blue 25l	25l
T199001	Defoamer 1l	1l
T875003	Spray Master Alkaline 1,5l	1pc.
Y899050	Cleaning Cloth small 2-ply	1 roll
Y899201	Wall Holder	1pc.

Technical data
Application and usage
Downloads

Appearance:liquid
Colour: light blue
Odour: characteristic
pH-value (at 20°C): 13,0 - 14,0
Melting point: ≈ 0°C
Freezing point: ≈ 0°C

Initial boiling point: ≈ 100°C
Flash point: 43°C
Density (at 20°C): 1,03 g/cm³
Water solubility: completely miscible
Dynamic viscosity (at 25°C): < 10 mPas

AQUA CLEAN BLUE is applied to the surfaces to be cleaned by spraying, spreading, or using steam or high-pressure cleaning equipment. When heated to 80 °C, its effectiveness increases by up to 50%. Therefore, the water content in the working solution can be increased. Depending on the type of soiling, leave it to work for 30 to 60 seconds. Then rinse the surface with clean water and wipe dry.

DILUTION TABLE | AQUA CLEAN BLUE:WATER
Machine tools | 1:1 - 1:2
Food machines | 1:2 - 1:5
Floors | 1:10
Brushing machines | 1:20
Tarpaulins | 1:20
Packaging machines | 1:20
Steam cleaning | 1:20
Metallurgical material | 1:1 - 1:2
Circular saws | 1:2
Cleaning of not very oily surfaces | 1:20